T1 Max

100% worth it. That printer goes for $500 on their website. But it is a gamble, like all of flsun's printers. IMO the max isn't better than the t1 or t1 pro because of the lack of an enclosure.

I ordered 2 (two) S1's on Nov. 23rd, they both arrived this past Tuesday (16th) via FedEx, which is an expensive way to ship two oversized boxes that weigh approximately 100lbs a piece...just sayin. Further, I'm not entirely certain where/who started this whole 'out of business' rumour but, it's not

I'm putting on a Dragon Burner with a V6 hotend I had sitting around and a Biqu Nebula extruder that looked cool. To make this work, I printed AfterBearner X gantry parts, which move the rods closer together so the extruder motor can sit above the rods. I'm swapping the board with a BTT SKR V1.4 Tur

Its hard to say honestly due to all the QC issues with flsun, but a "used and or allegedly refurbished" t1 is under 100 and the t1 pro is just over that. Really the main thing here is that you can easily swap in off the shelf parts which for flsun went out after the v400. I personally have a super r

I bought a used one from FLsun, it arrived and wouldn’t calibrate or heat the nozzle. FLsun was very helpful and sent some extra parts. I’ve got the T1 Pro and S1, they can be finicky but are great machines.

Hi, Over-Poem After coming up empty for an alternative solution for alternate sources, I had no solution but to wait on FLSun. FLSun did finally send me a new 1) main board, and a 2) Steeper as a replacement. It took awhile since it came from China, and many back and forth emails, logs, etc. About 2

Story time! I bought a t1-u in December and it burnt out in April. Begged for service and they shipped my printer to nj and back and there it was upgraded to the t1 pro T1 pro worked until July until the same motherboard burnt out. This time they wouldn’t refund me so I had to make posts online unti

It really depends on what you’re looking for out of another printer. I bought this T1 Pro used from FLsun, they’re offering some pretty good discounts on those and the S1. I also have a P1S and a Qidi Plus 4. I’d say do it, and I wouldn’t hesitate to buy one of their used machines with the understan

For PCCF, I'd recommend the Qidi q2. Its better set up to handle abrasives and more demanding filaments that require a heated chamber. The hotend reaches up to 370C, the bed up to 120C, the actively heated chamber up to 65C. Although, if you are solely after speed, nothing beats the delta printers m

I bought the kobra 3 with multicolor ace. Its a good printer. But then I got the flsun t1 pro about a month later and it is my favorite printer. I got one open box for 350 straight from flsun.The only issue was the extruder was jammed. I fixed it and since it has been amazing. Just have to watch you