T1 Max

100% worth it. That printer goes for $500 on their website. But it is a gamble, like all of flsun's printers. IMO the max isn't better than the t1 or t1 pro because of the lack of an enclosure.

I ordered 2 (two) S1's on Nov. 23rd, they both arrived this past Tuesday (16th) via FedEx, which is an expensive way to ship two oversized boxes that weigh approximately 100lbs a piece...just sayin. Further, I'm not entirely certain where/who started this whole 'out of business' rumour but, it's not

I'm putting on a Dragon Burner with a V6 hotend I had sitting around and a Biqu Nebula extruder that looked cool. To make this work, I printed AfterBearner X gantry parts, which move the rods closer together so the extruder motor can sit above the rods. I'm swapping the board with a BTT SKR V1.4 Tur

Been hearing a lot lately about flsun ghosting. Makes me want to out my t1 pro on ice for a bit in case I need parts. As far as i know these machines can be flashed back to previous firmware but I could be wrong, been a while since I was told that. If you updated through the machine screen you may b

Have you looked at the Centauri carbon? I have a Bambu x1c, 2 elegoo resin printers, 2 flsun t1 pros, and a Centauri carbon. My least favorite are the flsuns. I hate them. I always have to tinker with them. They don’t print as accurately. Good maybe for figurines and ornamental parts. Forget functio

Don't.. T1 and S1 aren't made for those kinds of materials, and they never claimed they were. You're gonna destroy your hotend/heatblock, and flsun doesn't have any replacement parts in stock.

V400 is an excellent machine, although with mine I’ve never quite gotten dimensional accuracy to where it needs to be. I agree that this is the best machine FLsun has made. After tearing into my less than a full day old T1 Pro and having done a lot of work to my V400, build quality between the two i

I have had a T1 Pro now for about 6 months. The hot end heater died second week in (many people had this issue). After replacing that it has run nearly every day without issues that are not typical of all printers. Right now I am having some major first layer issues that I cannot seem to get right n

Not a chance I’d buy another flsun. The T1 pro is so finicky I hated it. And I have 2 of them.

Its hard to say honestly due to all the QC issues with flsun, but a "used and or allegedly refurbished" t1 is under 100 and the t1 pro is just over that. Really the main thing here is that you can easily swap in off the shelf parts which for flsun went out after the v400. I personally have a super r