T1 Max

I'm putting on a Dragon Burner with a V6 hotend I had sitting around and a Biqu Nebula extruder that looked cool. To make this work, I printed AfterBearner X gantry parts, which move the rods closer together so the extruder motor can sit above the rods. I'm swapping the board with a BTT SKR V1.4 Tur

Have you looked at the Centauri carbon? I have a Bambu x1c, 2 elegoo resin printers, 2 flsun t1 pros, and a Centauri carbon. My least favorite are the flsuns. I hate them. I always have to tinker with them. They don’t print as accurately. Good maybe for figurines and ornamental parts. Forget functio

V400 is an excellent machine, although with mine I’ve never quite gotten dimensional accuracy to where it needs to be. I agree that this is the best machine FLsun has made. After tearing into my less than a full day old T1 Pro and having done a lot of work to my V400, build quality between the two i

I have had a T1 Pro now for about 6 months. The hot end heater died second week in (many people had this issue). After replacing that it has run nearly every day without issues that are not typical of all printers. Right now I am having some major first layer issues that I cannot seem to get right n

I print PET-G exclusively. On the FLSun T1 Pro. Same PEI plate as well. We don't use any glue sticks or anything. Your issue is with the Z-height. It's way too high. It looks like you're putting frosting on a cake. Have your run the auto bed leveler? Do that, then print a first layer test, until you

I'm sorry to hear that! The newest flsun series of printers hasn't been the most reliable printers, but if they get slown down alittle and the reliability and quality goes way up. Here is my profiles for the T1 and T1pro.. Free to download and use. https://www.printables.com/model/998756-flsun-t1-an

I've been using the Viking3DK ones... they seem to work pretty well. https://makerworld.com/en/models/1642037-flashforge-adventurer-5m-pro-pla-profiles-orca They made a good set I downloaded for my FLSun T1 Pro as well.

Honestly it worked really well. Ive had a few people do this after I showed them and most people just do 1 bentobox and they've said that it worked just fine. I opted for 2 because the t1/t1 pro has a pretty large enclosure compared to a bambulab enclosure that the bento was originally designed for.

Fair enough on all. I am finishing my second complete hot summer in TX, and our house temp is already at 78 for most of the day. I really don't think temp is an issue for me, but if I fail again I'll definitely employ that as a fix. All my bed adhesion and a few other issues disappeared as soon as I

All good points! I’m still learning and experimenting- been printing less than 2 years. I’m most interested in your comments about tall and slender. I also have a FLSun T1 Pro, and it’s twice as fast as everything else I have and still produces great surfaces, except tall and slender and I mean real