Photon Mono M5s Pro

That's this page, correct? https://store.anycubic.com/products/adapter-1 Unfortunately, this isn't the adapter for your model. Though it says it's for the Photon Series, implying all Photon mosel printers, it's actually only compatible with a very skint few models, listed on the page (Air Heat& Pure

One of my two Anycubic m5s pro vats is stripped. My elegoo mars2 pro vat has been fine for many years, one of my two Saturn 4 ultra vats is stripping. Just seems to be a crapshoot. I just sand it down smooth so no chunks come off in the vat. Whether it's bare metal or not doesn't affect anything.

I love my Anycubic Mono M5S Pro, I just use a 70-30 mix of regular resin to abs-like and it makes well-detailed models that don't break when you drop them onto hard floors from 6ft up.

Because you are using Lychee. I read that in order to make use of the sensor suite on the m5s, you need to slice your files in Anycubics own slicer, Photon Workshop, or in Chitubox. Those are the one 2 slicers which support the meta data required for the "Intelligent Release" force sensor on the M5s

Anycubic Photon Mono M5s Pro Out of the box, killer no issues. I have a m5 vat as well for FEP. Never had an issue and heater is a great addition.

Hola Sonic. Gracias por ayudarme, en la parte central de la base de resina si estaba con suficiente resina para evitar eso, al parecer solo no se alcanzaron a pegar las primeras capas, en otras impresiones si han salido "correctas de esas zona" y de hecho tengo otra impresora que es Anycubic Photon

So the "smearing" thing has happened for me with anycubic abs like. I don't know if plant based is thicker but I found out that thicker resins can have issues with lift distance because it doesn't "fill the gap" when lifting. So I just increased the lift distance a couple mm on the base layers and t

I have the m5s pro. Does the rerf print? Did you check the screen (run the exposure test in the dark or with a paper over it)? I've had random problems after switching resins a few times and basically went back to the Anycubic standard and had to increase the lift distance significantly to get it to