Photon Mono M5s Pro

Look for a printer with some form of assisted levelling, a load sensor to detect fails. As a foundation these two imo are really the only quality of life features to come to resin printing since mono screens. A nice bonus feature to look for is exposure calibration. If the printer you end up on does

That's this page, correct? https://store.anycubic.com/products/adapter-1 Unfortunately, this isn't the adapter for your model. Though it says it's for the Photon Series, implying all Photon mosel printers, it's actually only compatible with a very skint few models, listed on the page (Air Heat& Pure

One of my two Anycubic m5s pro vats is stripped. My elegoo mars2 pro vat has been fine for many years, one of my two Saturn 4 ultra vats is stripping. Just seems to be a crapshoot. I just sand it down smooth so no chunks come off in the vat. Whether it's bare metal or not doesn't affect anything.

I love my Anycubic Mono M5S Pro, I just use a 70-30 mix of regular resin to abs-like and it makes well-detailed models that don't break when you drop them onto hard floors from 6ft up.

Just my two cents. I have the ultra 16k and have had zero issues with the drip tray and zero issues leveling the build plate. As far as screen replacement, I did a screen on my anycubic m5s pro and I had to take a significant amount of it apart. I'm not sure why that's such a deal breaker. It's defi

Anycubic Photon Mono M5s Pro Out of the box, killer no issues. I have a m5 vat as well for FEP. Never had an issue and heater is a great addition.

I own the m5s pro and the ultra 16k. Two things that set apart the ultra for me. Tank heater, wireless environment. Both need to be leveled. Both printed great to start, but after about a year the m5s prints but gives all kinds of issues that I think are related to issues with the Z axis that I have