Photon Mono M5s Pro

Every printer ever made has had someone with a failure out of the box. And as has been said a thousand times, people don't post when they're happy. The only printer I've had that was a constant pain was the m5s pro and Anycubic stopped selling that one conspicuously quickly. My ultra 16k has been a

I have personally experienced this before on used machines. Here’s what worked for me: Fill the hood with hot, concentrated Mean Green and let it soak for a while. After that, buff it out with Meguiar’s PlastX — the kind made for restoring cloudy headlights. Honestly, treat it just like a cloudy car

Look for a printer with some form of assisted levelling, a load sensor to detect fails. As a foundation these two imo are really the only quality of life features to come to resin printing since mono screens. A nice bonus feature to look for is exposure calibration. If the printer you end up on does

That's this page, correct? https://store.anycubic.com/products/adapter-1 Unfortunately, this isn't the adapter for your model. Though it says it's for the Photon Series, implying all Photon mosel printers, it's actually only compatible with a very skint few models, listed on the page (Air Heat& Pure

I did the light test with a bar blade and I had a very slight (maybe less than 1mm) light shine through. I can't guarantee the problem was with the plate or the blade however. I don't own anything like a steel rule or a tri-square so it would come out of pocket to test it again. I use a 32gb stick I

Just don’t rely on their “AI” detection. It’s a joke. Remote viewing is great though. The reality is it takes so many layers just to get the build plate above the vat even if they fixed their AI detection you’re still quite a way into a print before you would even know if you had a failure. I’m not

I got anycubic mono m5s pro. It was cheap and functions great plus I have no issues so far. Mainly used for miniatures

Anycubic Photon Mono M5s Pro Out of the box, killer no issues. I have a m5 vat as well for FEP. Never had an issue and heater is a great addition.

I personally use an AnyCubic Photon Mono M5s Pro, it has been doing the job for me. Can't say whether it is the best, but it definitely works well enough for me.

Hola Sonic. Gracias por ayudarme, en la parte central de la base de resina si estaba con suficiente resina para evitar eso, al parecer solo no se alcanzaron a pegar las primeras capas, en otras impresiones si han salido "correctas de esas zona" y de hecho tengo otra impresora que es Anycubic Photon