SN7100

Hi, Just jumping on this as I built a new pc yesterday and ran into issues with MPO. The system configuration is as follows: Ryzen 7 9700x Gigabyte B650m gaming wifi motherboard (bios updated) T-force delta rgb 2x16gb 6000mt/s ram Xfx quicksilver 319 speedster 7800xt Wd black sn7100 Nvme 2tb gen 4 s

WD_BLACK 4TB SN7100 NVMe SSD, I just did it tonight. Now I don’t have to worry about storage for its lifetime and I can dual boot windows and Bazzite/SteamOS

I got the sn7100 4tb ans also evo plus 990 in 4tb. Sn7100 is better suited for a handheld use under high loads. Pulls less watts underload runs cooler. 990 plus 4tb has better aspm power draw on idle. Under load it pulls more power and creates more heat. On idle it conserves the battery better. Get

Most people are responding to back buttons which I don’t use. I’ll respond to SSD. So I was going to buy the 990 pro until I realized it takes more power, which means less battery life. I went with what was certified for use with it which was the western digital SN7100 (actually the SN7100x is the o

First one ram wouldnt plug into your laptop. You have to get crucial 16gb sodimm only (search exactly same " crucial 16 gb ddr5 sodimm" it will make total ram=32 gb and yes wd sn7100 is good for nvme m2 slot for 2 tb

The wd black sn850x is gen 4 by 4, don't go on Flipkart item descriptions,they aren't accurate at all,and if you think you are getting gen 5 on the crucial, it's not gonna be useful,as your laptop supports only gen 4 and gen 5 drives run hotter and consume more power, so go for the sn850x,or if you

The WD Black SN7100 is working on my ASRock b350 pro4, but only in the M2_2 Slot, not the faster Ultra M2_1. In order to get it working I installed a newer UEFI version (10.xx) and — most importantly — activated the "Force PCIe on M2_2" by switching from "Auto" to "Yes". I'm still quite frustrated as

Hi, yeah, both main drives I tried (WD SN7100 and Samsung PM981a are on the QVL list. But the same thing happens if I put my SN850X on those slots. Not recognized at all on the no. 2, and X1 on the no.3.

Slap me silly and call me Willy (copyright M539 Restorations on YT), I cleaned both NVMe slots, and the one not working now works at 3.0 X4 with the PM981a, and 4.0 X4 with the SN7100. THe one working at X1 is still at X1 speeds, though, but at least it's a step in the right direction. Effin' dirty

I have a WD SN7100 and a 980 evo. I'm pretty sure they are supported. I'm pretty sure in my case, it started happening after I installed CachyOS to the drive with Windows. No matter what, as long as that drive was in the pc, out would not boot. So, I formatted the drive, and it fixed. All I can thin