Deco X20

I had those same problems with my network of TP Link Deco X20 in mesh. The solution was to pass the Nest speakers to the 2.4GHz network and set the default node to which they must be connected.

A decent mesh with strategically placed access points will probably work just fine here. I like the TP-link Deco X20 if I’m building a non-unifi system.

Bonjour, je m'excuse pour mon français médiocre mais j'utilise IPV6 avec le TP-Link Deco X20 sans problème mais les premier connexion, voici mes paramètres sur mon TP-Link: Get IPv6 Address/Obtenir une adresse IPv6: Slateful/ArdoisePrefix Delegation/Délégation de préfixe: ON/activéAssigned Type/Type

Had a double NAT with ATT BGW320–>Deco X20 causing Plex to not function. After a week on the Plex forum and a local AT&T guy it was solved by changing from a Dynamic to Static IP Address in the ‘Internet Connection’ menu item on the Deco app. Set the static to the external address on the BGW and the

Mine loses internet connection if I click on “internet settings” within the app. And yes it’s up to date. Only way to get the internet back is to unplug the Ethernet cord from the WAN and plug it back in. That fixes it. Also does this if any changes to DNS is made. Deco X20 v4.6 here.

It varies by router, so you’ll need to check what router you have and how to do it… there should be a manual way to do it based on IP addresses and whatnot, but my family’s particular router — TP-Link Deco X20 — includes a “camera privacy” option which includes blocking the camera from accessing out

Over the last 2 weeks or so, my home network has been awful, specifically with my WiFi cameras. I haven’t made any changes which is what is driving me insane. I have always had my ISP router set to bridge mode with my Deco XE75 as the main router. Have 2 other XE75s along with a Deco X20 outdoor uni

I make use of a Mesh network (TP-Link Deco X20). That should result in a more stable connection, right? Since I added a fourth Deco X20 node, I noticed that the Sub-S isn’t being recognized by the multibeam anymore. Any experience in setting up a proper mesh network, with the proper connection betwe

Deco x20 v1.20 3 unit set, online since August 2021. Coming to 4 years now. No problems except after one update one of the satellite unit upstairs got slower speeds (50 out of 200mbps). Attempt to connect using cable in ap mode then change back to mesh mode. Now I get 130mbps out of 200 upstairs whi

your router is probably the issue if its the standard Telstra one. generally they are trash. Telstra might also be trash but largely NBN its all the same. Superloop I'm a fan of but any of them will be good. get yourself a mesh router setup. either a new one if you want to spend cash or just a secon