Deco BE95

Thanks to all who had suggestions. Unfortunately this turned out to be a hardware issue with one of the Deco units. The unit seems to be a hardware failure on the internal switch. It fails to negotiate a 'Link Up' status on both the 10Gbps and 2.5Gbps ports, even with known-good CAT6A shielded cabli

I replaced my three XE75s with three BE95s a year ago. For six or seven months the 95s were extremely stable, but something started happening in September and I’ve had stability and speed problems since. A month ago I received an apology out of the blue from ATT that said a software update had cause

Your devices if they did not support WPA3 would not be able to connect to start with (unless you're in hybrid wpa2/wpa3 mode) I would say its more your devices don't support the roaming protocols 2023 - 2024 have a lot of issues with Wi-Fi7 as they do not possess the hardware to understand BE & MLO

I have now tried all ports but the backhaul continues to be wireless. TP-Link has said that the BE95 is either wireless or wired and it "detects the ethernet backhaul cable automatically". I would not have purchased the BE95 if it did not have the wired backhaul capability. I have now tried connecti

You should reference this page: Deco Ethernet Backhaul: Setup, Wiring Rules, and Troubleshooting | TP-Link Ethernet backhaul requires support for IEEE 1905.1 protocol. Supposedly some switch brands, especially DLink, don't support the protocol and will have issues with ethernet backhaul. My understa

I ended up getting a new Deco BE63, will be using that from now on and hope it's better than the BE95. I wasted more than 5 hrs trying to get the BE95 as my main node... No dice, my older Deco was easier to set up and switch between main and secondary nodes...Will probably stop using TP-Link product