DF54

Yeah from factory DF54 worked fine only for light and medium roast coffee and for Dark Roast it was clumping pretty hard Miicoffee thankfully mailed Metal De-clumper along with a chute upgrade for the ionizer and I am not seeing this issue for the past 4months since the upgrade. One more thing to en

Love my DF54 and use a metal catch cup. I just use the bellows thoroughly for each dose and clean the shoot 1-2x a month and it’s great I do recommend 2-3 spritzes of water as RDT and haven’t had any issues. Enjoy your grinder Fwiw, I bought via MiiCoffee and they did a good job

I highly recommend getting six or so small 2 oz glasses and pulling a salami shot. Chris Baca explained it well years ago: https://www.youtube.com/watch?v=2aD33p4_fJo Basically sour means shorter/darker/cooler and bitter is the opposite end of the scale and longer/lighter/warmer. A salami shot will

im still pretty new to espresso but i got a DF54 from MiiCoffee and its amazingggg. just make sure to brush out the shoot that the coffee comes out every time to avoid a clog. It’s very quiet and sleek.

I had a DF54 for about 2 months. Every week it would completely clog (using rdt and hot starting, bellows pumping…) and I would have to disassemble it. Definitely not what I wanted to do in the mornings before I had any coffee. Although it’s an entry grinder, I want a $230 grinder to function consis

I suspect the grinder is mostly the issue with consistency. And flavor. The minimum viable "adequate" grinder is roughly $250, the usual recommendations here being the Baratza ESP and MiiCoffee/Turin DF54, possibly the new Fellow Opus 2 (although definitely avoid the first one, speaking from experie

De DF54 (white label, dus onder verschillende merknamen te verkrijgen) is de best beoordeelde goedkope koffiemaler met een consistent resultaat. Alle onderdelen zijn los te bestellen (bv MiiCoffee, Aliexpress). Op Amazon gezien voor €255.

My DF54 came with misaligned burrs and I had a similar issue to what you're describing here. There are some good videos about flat burr alignment (I found Lance Hedrick's useful, there's also one from MiiCoffee I think focused on the DF54 itself). Took some trial and error over a couple of hours but

I've bought DF54 and an Apex v2 espresso machine from MiiCoffee and they been ok. Still answering my questions after a year.

I have recently received a DF54 from mii coffee and had major clogging issues. They reached out and provided a video detailing adjusting the metal declumper (I have the V3) which I now believe I mistakenly bent outward too much without knowing what I was doing. Anyway, got the adjustment made which