LP-UNF

You might benefit from a pair of active speakers that are relatively good and cheap. Something like Adam D3V, Kali LP-UNF. I'm assuming that this will be something for computer? Those that take signal from PC via USB and require no amplifier purchase, DAC, or any other additional equipment, so this

Basically through USB is less susceptible to error correction issues like some MoBo coax outputs. I'd say get this DAC - https://www.amazon.co.uk/Fosi-Audio-ZD3-Converter-ES9039Q2M/dp/B0DHXBTG8P This pair of LP-UNFs monitors - https://www.andertons.co.uk/kali-4-inch-2-way-powered-loudspeaker-system-

Hi! Thank you! I wanted to place the interface in the middle, but it has that glossy mirror-like finish, and there's a red LED on the bottom of the monitor, so if I place the interface right below that I will always see the reflection of that light. Plus I constantly plug my guitar and wired headpho

Your problem (for your lowish budget) would be that cheap Blu-ray players don’t have stereo analog RCA outputs. E.g. Sony BDP-S1700U. And good active speakers in your budget don’t have digital inputs. E.g. Kali Audio LP-UNF (EAC review) (Thomann listing). Therefore you would also need a DAC with coa

UPDATE: I suspect I have found the issue. I tried out the Bluetooth feature early on after setting up the speakers, and I just found my phone is auto-connecting to it by bluetooth and possibly overriding its input from my audio interface. ----- Original post below ----- I'm sorry to ask here, but Re

oh nice, what do you mean for a streamer? A WiiM Pro with aesthetic damages, but fully functional. Pluses are: BT feature, but you’ll use Spotify Connect in the end, full quality with your mobile working as a remote on your wi-fi; RoomFit: with your mic’s phone (or a calibrated one attached to it) y

Also look on Kali Audio LP-UNF, they are kind of universal for anything.

Same issue, fix solves it temporarily until speakers are changed or after restart.But also highly inconvenient as it resets all the wireplumber config. Is this bug tracked somehwere? It's such a weird behaviour too I connect to LP-UNF via Bluetooth (Kali Audio LP-UNF), which are the same speakers th

Get this interface: https://www.sweetwater.com/store/detail/M2--motu-m2-2x2-usb-c-audio-interface then you can control the volume of the speakers with the monitor knob on the interface. This will work with any pair of studio monitors, you can go with any pair of studio monitors. I would recommend th

iLoud Micro Monitors/Micro Monitors Pro, iLoud MTM MK1/MK2, Kali Audio LP-UNF, Kali Audio LP-INF, ADAM D3V. If you don’t have audio interface and don’t need one and wanna go most balanced and budget way (but not at cost of sound) i would choose Kali Audio LP-UNF. Kali Audio MM-6 is the way too if yo