NASync DXP2800

TL;DR - Every device on my LAN network can reach 1000 Mbps, except my NAS, which only reaches 100 Mbps. I've tried different cables, switches, router ports, and delved into the command line and trying to force high speeds with `ethtool`. No luck.

EDIT 2: I ended up returning my NAS due to its faul

It's funny you made this thread as I was about to make a post about how NFS is broken with the DXP2800. There is most definitely a problem with the current NFS implementation. Is anyone successfully using a Ugreen NAS as a NFS server with no issues?? Also, NFSv3 is the highest available NFS version

The problem with using cheap as your only requirement is that chances are if you decide to really use it, it wont meet your actual storage and usage needs. Are you using this as file storage, to host apps/vm’s/services, for media/large file storage, etc? What sort of networking do you need…1Gbps, 2.

From my experience totally, absolutely NOT! I also have a DXP2800 with 2-8TB BarraCuda Seagate drives. The problems started when I decided to install a Samsung 980 Pro SSD 1TB PCIe 4.0 NVMe drive to use as a cache drive. Eventually I started receiving over temp beeps and log msgs, so I tried improvi

Adding the kernel parameter to downgrade the ata speed to 3.0gbps seems to eliminate the problem completely. One problem is, this setting doesn't seem to survive firmware updates, so you have to re-apply after every update. It would be nice if Ugreen added a setting/toggle in UGOS to set the ata spe

UGreen DXP4800 has 2 x 2.5 GbE ports if you're okay with that. The DXP4800 plus has a better processor and higher TDP but a 10GbE + 2.5GbE ports. I'm running 32Gb RAM (Crucial) on my DXP2800 (2bay model). Not to dive too deep, the n100 is not hard locked to 16Gb max. Some people have gotten 64Gb to

DXP2800 NIC wont operate @ 2.5Gbps - even with a UGreen 2.5Gbps switch. You get 100Mbps

A few weeks ago, I had a strange issue with my DXP2800. Transfers between the NAS and the router would be capped at 2-3MB/s after I had rearranged its position, likely pulling on the ethernet cable. I had to restrict the max speed on the router's ethernet port to 100Mbps or it would not connect to t

Hi all,

I have a drone company and have a team of pilots all around the state who need to upload footage to a central point. I then have a team of reviewers that needs to access this footage and I need to be able to download and save it to an external hard drive myself. I purchased a UGREEN NASync

Hi everyone. I joined the Nas bandwagon and got my first NAS UGREEN NASync DXP2800. All setup yesterday but since I set it up, I am facing constant disconnection. See attached screenshot. And even when it's connected and working, it takes few tries to get it connected through the android app. Same t