UniFi G6

Unifi (Ubiqity) ponuja celovite varnostne rešitve za domove. To vključuje tudi domofone. Glede na to da že vrsto let kraljuje na samem vrhu teh rešitev, verjremi, da je uporabna. Ker je tako popularna rešitev, imaš tudi na YouTube-u veliko tutorialov (vodičev) kako kaj naredit. Ko si omenil/a večsta

Not sure if you are having the same problem as I did with the G6 PTZ and G6 turrets, but worth a try. Type the IP address for the camera into your browser The username and password are both: ubnt In the configure page under "UniFi Protect Server", type in the IP address of your gateway/controller. R

I have three doors set up with G6 Pro entry, the Ubiquiti strike plate, and a door sensor on each. Each of these doors is on its own hub. I first adopt the G6 Pro Entry, then the hub, and finally connect them. However, when the G6 Pro Entry is adopted first, none of the door control functions are av

I guess it all depends on how handy you are. It isn't bad. You do have to mortise a cutout for it but it's pretty self-explanatory. What I did on all of my doors is I installed the new lever handle that locks and unlocks with a key. If you ever get locked out of your Ubiquiti system for some reason,

if you don't have a 3D printer and need a 2 wire kit these guys make one. I use it's pretty solid! https://23eightfive.com/products/ubiquiti-g6-pro-entry-poe-over-2-wire-retrofit-extender-mounting-kit

i set up something similar with a g6 pro entry on a gate in spain. the access hub mini works with most 12v or 24v electric strikes but italian locks sometimes use weird voltages. your electrician can put a multimeter on the existing lock to check. you got the major parts right - g6 pro entry, access

Super clean setup and nice work with drilling through brick!! That can be a bit unnerving for sure. I've seen several designs of these and I personally bought the one below. It's printed in ABS glass fiber which seems to be holding very way in the all 4 season we're getting where I am hah. I saw the

I put the G6 180 on the side of my house which is narrow and long. It has a weird view in the protect app that some people don’t love and I get that, but for my use case it’s perfect. In simple words, it will give you a lot more left to right (hence the 180 name), but not as much top to bottom. That

I just got one of these with a block of wood above the soffit. Works great and gives me the angle I need. https://23eightfive.com/products/ubiquiti-g6-180-flat-mount-uvc-g6-180-fm

for license plates you really need a dedicated camera with optical zoom like the G6 Pro Turret. the standard turret is too wide angle to capture plates clearly from 12ft up. i’d put a pro turret at each corner angled specifically at the street approach for plates, then use a G6 180 lower down around