Deco M5

I'd go with the TP-Link Deco M5 solid budget mesh, dual-band, easy setup. Covers your size home fine. Wi-Fi 6 is nice, but not a must unless you’ve got a lot of newer devices. Deco M5 (Wi-Fi 5) should be enough.

M4: https://www.pbtech.co.nz/product/NETTPL9403/TP-Link-Deco-M4-AC1200-Dual-Band-WiFi-5-Whole-Home M5: https://www.pbtech.co.nz/product/NETTPL9005A/TP-Link-Deco-M5-AC1300-Dual-Band-WiFi-5-Whole-Home More expensive one is mildly faster but meh. Buy whatever one your budget supports. Get a three pack

Salutare. E perfect daca ai prize de retea deja. Eu folosesc un sistem de meshing Deco M5 conectat prin cablu. Recomand

I’m not familiar with huawei products, but do you know what the lan Ethernet ports are? If they’re 1 gig ports, you could just disable the wifi on the huawei and hook up any 3rd party access point. A lot of consumer products on the market will probably be all in one routers with wifi built in, but t

Deco can absolutely work with an Ethernet backhaul. On one of your M5s, use one port to connect to WAN, and the other to connect to LAN. This is the Router Mode configuration. On the other M5, use one port to connect to the LAN. Because you bought a pack of three M5s, you can put a switch between th

Mobile is s25 ultra, it matters least in the setup because it can stream 1080p which any mobile can handle, Controller i was using dualsense with phone mount, but it was very heavy since mobile would be abit hanging causing wrist pain so bought gamesir g8 galileo Wifi i got it as part of my act conn

1gbps good enough. If you know for sure that you need more then you know exactly how much you need. If you not sure, means 1gpbs enough liao Also the singtel mesh devices are trash. If you're price conscious, the tp-link Deco M5 is cheap, gets the job done and can be found on carousell.

Yeah it will remember. The best thing to do is to grab a two pack (or three pack) of tp-link Deco m5 or m7 mesh WiFi jobbers. Set them up with a nice WiFi name ‘fozzie free WiFi’ and make the password ‘your phone!!’ Or something. Then whenever you change your router, you just turn the WiFi off and p

I have an M5 mixed in with M9. I would use an M9 as the main deco instead of the M5. Also don't pass everything though that Kitchen M9. Put a switch there and not use the M9 as a one port switch like you have now or just plug your main deco into the same switch as the other ones. And get rid of that

Ok, I got it working. I decided to pull everything apart and start over, but go one baby step at a time. - I disconnected the 3-way splitter, left the poe filter on, and connected it to just the one line that brings internet into the basement - at the modem, I connected the 2-way splitter with a lin