SV06 Plus ACE

my sovol bed is the most taco you have ever seen i got a used sv06 plus ace for 150 on ebay untested, gambled on it. the gantry is destroyed. it had a piece of manufacturer foam stuck in the belts and both i and the previous owner tried to use it like that, leading to extended periods of the motors

You’ll notice that almost everything I printed here is with Sunlu PLA, which I honestly think is amazing. To give you an example: I printed a pink bird feeder in PLA and put it outside on my balcony in full sun all day in May (I live in the countryside in Italy, where it gets insanely hot — like 40°

It depends on your definition on "good printer". They are having good price to performance ratio, but you will need to do more little bit more maintenance on them than on Prusa or Bambulab printers. Also printing profiles for them will need some slight tuning from you to get perfect results. Yes, So

after many month of getting part and dealing with support i finally got my sv06 plus ace working.. It's a hassle and seems like it will never work, but in the end i know this machine backwards and forwards , there isn't anything mechanical on this i couldn't fix without help from support. So after a

seriously take a look at the Creality SparkX i7 if you want multi-color or if you want big print volume and open source the Sovol sv06 Plus ACE. both damn good printers in the price range you're looking at. also the flashforge ad5x if you want coreXY and multi-color.

The sv06 is a great machine, but in my experience with Sovol, they can all take some tinkering to get perfect. My Sv07 Plus can be quite the bitch to get level, but from what I’ve seen the sv06 is still better than that machine. If I could make a suggestion, if you can swing it, look at the Ace vers

My first printer was the SV06 plus ace and I couldn’t get it to work for weeks cause of styrofoam in the plate. Then I bought the P1S and I absolutely loved it best printer by far. Then I got the ender 3 v3 for like 260 after shipping and it’s a pretty cool little printer the quality is really on po

For cosplay you will probably want something a little bigger. A sovol sv06 plus ace would be a great printer for this use case

Just ask for a replacement. There’s also a list of top ten most recommended printers on this subs wiki and they’re all pretty solid, some more affordable than others, if you want to return it and try a different brand. I have a sovol sv06 plus ACE and it worked pretty well out of the box, for about

I spent weeks looking for my next printer.. then saw the SV06 Plus Ace on sale just a tad over 300.00 I was coming from my second printer selections.. My first printer was the Ender 3 pro and I modded it with new motherboad to make it super quiet, then dual gear extruder, upgraded bedsprings and adj