SV06 Plus ACE

my sovol bed is the most taco you have ever seen i got a used sv06 plus ace for 150 on ebay untested, gambled on it. the gantry is destroyed. it had a piece of manufacturer foam stuck in the belts and both i and the previous owner tried to use it like that, leading to extended periods of the motors

so the M5C is no longer owned by anker as they sold their entire 3d printing line to eufy. also that printer is 5ish years old now if I remember correctly. I would be more worried about parts/support buying one personally. you don't need to be an engineer to enjoy 3d printing. there is such a range

Whatever you do, don't update the "SV06 Plus ACE" with the "SV06 ACE" firmware. It will ruin the build plate and the nozzle by dislocating the nozzle wiping area to the middle of the build plate instead of the corner. That will cause the nozzle to grind into the PEI coating and scrape it off. Sovol

My opinion: do not get the sv07. I had the sv07 plus a year ago and it was genuinely so poorly designed I was shocked it was ever sold. The bed needs to be manually leveled with bed level screws which is whatever, but the screws aren’t long enough and will rock off the knobs during long prints. So y

Avoid elevation at all costs. Their printers are mid quality at best, and their firmware violates the GPL 3.0 license of Klipper. Bambu is decent, but their locked down ecosystem is why I avoid them, but that isn't the most important for most users. I recommend Sticking with the A1 Going for a Sovol

I’ll say, for the price. I think Sovol is one of the best out there. I originally got an SV07 Plus specifically because it was massive compared to other $250 printers. And Klipper is pretty easy to use. But I’ll also say, I had a bit of tinkering to get everything going the way I wanted. My advice w

I've been using the SV06 Plus ACE for about two weeks now – and honestly, it's been a real rollercoaster. It started with the bed being completely loose. Then I noticed a weird humming noise coming from the Y-axis. The bed also doesn't heat evenly – I'm seeing temperature differences of up to 7 degr