CX810

I started with a Ring video doorbell in 2017. Last year I moved to PoE Reolink cameras with BlueIris as the NVR (I also have a Reolink 8 NVR but it's just a backup NVR and extra PoE switch). This month I bought a UniFi Cloud Gateway Max and one UniFi camera to test if I want to pay more to move into

I currently use both BlueIris and the Reolink NVR. Reolink NVR is dummy-proof but lacking in features, especially scrubbing video in a timeline. I now use the Reolink NVR as a backup NVR to BlueIris. One of my favorite features of BlueIris is that it has the option to record continuously using the l

You can use the app. The type of motion detection depends on your camera's capabilities. For example, the Cx810 detects animals, cars, and people, while the doorbell detects ringing and people. The older unit, like E1, only detects motion. The limitation with the app is only one detection rule; you

I have my PoE cameras (front porch and above garage) and NVR in the garage connected to a mesh router point (ASUS Zen Wifi AX). I have one ASUS main router BE-98Pro, and 2 additional mesh access points (including the one in the garage). I also have a PoE switch out there. It works pretty well. Since

Reolink professional models + CX models (particularly CX820 - only use this one in areas with great lighting at night) + reolink professional NVR. Default models from Reolink do not have activity/detection zones. Only those models I mentioned have that. Except for Duo 3 with firmware update, cx810 w

Oh well if you already have both NVRs you can always have both of them working. Ubiquiti as far as I know, doesn't have color night vision cameras, and Reolink color night vision cameras (CX models) are the best from that brand. So you could always use a mix of those 2 (like you use CX models where

I use the Reolink TrackMix, Duo 2V 180 degree, CX810 bullet, Reolink wifi doorbell, and finally a Reolink NVR. I also recently installed a UniFi system with 1 UniFi camera because it went on sale and I hear a lot about it. I've gotta say that I'm going to be slowly moving off Reolink. The UI and sof

can you run that NVR in hybridge mode (where it uses your home network to assign the cameras 192.168 ip addresses, then you can access the cameras directly?or maybe connect the cameras to your home network and access them with the NVR via the home network? The nvr will still record any reolink camer

Those professional models are going to offer better performance than like any "default" model from reolink. Only the CX models would be better but in proper lighting of course, those are literally the best models from Reolink. 180° degrees cameras look good in paper but in reality they stretch the i

If you uploaded this in the highest quality possible then no, this is really really bad. And I'm being nice here. The CX820 or CX810 is an extreme difference. It will be an extreme upgrade. However if you are looking to get the plate of the car maybe the headlights/tail lights will prevent you from