Reflex RS Turbo

Same as before. Expect 12 months between cycles. This year was odd, printers got released on a shorter cycle. The Saturn 4 Ultra 16K was probably supposed to be the Saturn 5, but Elegoo released it early (only 7-8 months after the Saturn 4/4 Ultra). Probably because Uniformation was releasing the 16

Yeah Anycubic long term support is ass. I own an M3 Premium and they ended support for them almost 2 years ago, yet I can still order parts (other than LCDs) for my Saturn 2s from Elegoo... which are the same age as the M3 Premium. Heygears is supposed to open up some of their settings later this ye

FDM printing experience really doesn’t translate to resin, you might as well accept you are starting over. My understanding is Formlabs is the only real option as a commercial grade resin printing system. Everything below that is ‘consumer’ grade and comes with a whole host of problems, challenges,

Anycubic is a non-starter imho. Poor support, poor QC (and the bar is low as is), and no per layer wait times. Elegoo is the best of the budget tier. The Saturn 3 non-Ultra is probably the best bang for your buck printer available right now, if it’s available in your region. At the high end sits the

No problem! I realized I accidentally said Reflex in the first post when I meant Reflex RS so my bad, edited to correct it to avoid confusion. This printer at its price point is a godsend and its insanely reliable. I have 3k hours, haven't had to replace the screen yet and have had seriously zero fa

In general, when my print fail I will always do a tank clean using clean function. It do not requires you empty the vat and only take a minute. HeyGears Reflex RS have a pressure sensor that will stop print if it detect foreign object on tank (I think Saturn 4 have similar feature but I have not see

Uniformation is having just as many issues with QC as the other manufacturers now, but cost twice as much. The GK2 is an antique (was dated in certain ways from launch) and can’t set Z offset in anything smaller than 1mm increments. GK3, haven’t seen many people with the midsize GK3. I do know someo

I personally love my Heygears reflex rs but I don't buy their resin because of the price so throw that in the ring. The tighter ecosystem doesn't let you modify many settings due to what they claim is "perfectly dialed in settings for our unique resin recipe" for near $60 a kilo. Bought one bottle w

If you want a "no bs" resin printer, I'd recommend the Heygears Reflex RS Turbo. It's worlds better than any elegoo or anycubic hobby grade printer out there. You can use third party resins in them with the standard profile and they work great, you dont have to use their more expensive resins, but i

Let's take it step by step. I've had a Reflex RS Turbo for a couple of months now, so I can guide you. - The Elegoo curing station will work fine for you. I opted for the Anycubic Wash & Cure 3 Plus with an extra tray. I don't regret anything, considering the goosenose and the price. - For the VAT,