Flint 2

GL.iNet Flint 2 - been using it for about 14 months now and it's been rock solid. Runs Open WRT so lots of options and the firmware will be supported for a long time. On that note there seems to have been a Wi-Fi issue with the latest release but this has now (I think) been resolved, I always wait a

I use a GL.iNet Flint 2 and have multiple profiles (3 different vpns) running. One for max privacy (Mullvad), one for port forwarding, and one for general use (a personal vps so I have minimal latency gaming without having to deal with my own isp). It works amazingly. I don’t have super high speed c

It isn't that difficult to do if you use the right equipment. I highly recommend GL.iNet routers for doing it. This site does a walk through of it: https://thewirednomad.com/vpn I would use the Flint 2 at home and a Slate 7 or Beryl AX for the travel side. Make sure you setup goodcloud on the router

Di rumah pake GL.iNet Flint 2. Memang terbaik nih router. Wireguard nya kencang, bisa set VPN tertentu per device. Install zapret gampang. Sampai sekarang masih awet.

🔒 Locked due to excessive misinformation and circular debate. As someone who's actually running a Flint 3 in a complex, real-world environment — here's a bit of clarity: ⚙️ My Setup: 1 Gbps fiber (up/down) with a failover 5G modem on LAN1 9 websites hosted behind a WireGuard tunnel to a VPS WireGuard

I have GL-iNet setups (Flint 2 + Beryl AX). VPN works although I have Public IP. For CGNAT, I recommend using Tailscale instead (GL-iNet routers natively support Tailscale but not as an exit node/server, only client mode), so instead, you can use an always-on device like Android TV or Apple TV, inst

Ich hatte Fritzboxen leid. Nur Probleme gemacht hat die letzte. Und generell können sie Dinger gefüllt alles, aber alles nur auf 0815 Niveau. Ich habe mir deshalb letztes Jahr 2x die GL.iNet Flint 2 geholt und bin mega zufrieden.

Thanks. I’m using GL.iNet’s built-in WireGuard server/client setup with QR import, so I didn’t manually duplicate configs. The client profile was generated directly from the Flint 2 server and imported into the Beryl. The main issue is the Beryl VPN dashboard stays stuck on “Connecting…” and interne

Upgraded my Flint 2 (MT6000) to 4.8.4 and immediately noticed a Wi-Fi regression with the exact same setup, placement, and clients. What changed for me: lower coverage weaker signal / RSSI worse performance through walls and between floors spots that were usable before became unstable or borderline

I use Op24 for my Flint 2 as the wifi function in repeater mode is much more stable than Stable Official GL-iNet firmware