Kobra S1 Combo

I’d still recommend the Bambu Labs P1S in this case. The controversy around Bambu is mainly about their closed ecosystem and the move to block third-party apps, not about the quality or reliability of the printers themselves. As for the Anycubic Kobra S1, I’ve watched a number of reviews and seen qu

Eu tenho uma k1c, ela imprime material de engenharia, a versão C possui bico endurecido para material com carbono. Minha opinião sincera, é uma impressora boa, imprime tudo sem dor de cabeça, mas ela tem alguns problemas que vc precisa ficar atento, mas é possivel imprimir coisas ou fazer upgrades p

That’s an interesting assumption. You’d be wrong. But interesting nonetheless. Honestly, no clue what caused and I likely won’t until I get the blob off and take a look at the nozzle. I had this happen on my old Anycubic Kobra S1 printing PETG-CF and it was because the nozzle started leaking (someth

I use this one: https://cults3d.com/en/3d-model/tool/anycubic-kobra-s1-poop-chute-catch The downside is it doesn’t detach but I chose it because it doesn’t block the fan vent! A lot of them do! Since Anycubic cheaped out on a lot of stuff with this to get the price down, I wouldn’t fancy altering es

for 11 months and 650h with my Kobra S1 Combo which can Print & Dry i always at EVERY Print did Print&Dry with 55C which apparently is to hot. Never had a problem. So you are telling me a Crappy E-Wate Company Anycubic whos Printers dont work can Print&Dry with 0 issues even hat higher PLA Temps but

Fwiw I love mine, minor grumbles and all - my first FDM so it's been a learning experience. If I had any advice, it would be the common issues I've seen popping up here and experienced myself: - Be wary when changing/removing/replacing hotends - be sure to seat the hotend all the way up when you pul

Unfortunately, I have experience recently with this assembly. I definitely see an extruder screw missing on the mid-right. May be good to check out these pictures and videos from AnyCubic. https://wiki.anycubic.com/en/fdm-3d-printer/kobra-s1-combo/extruder-module-replacement-guide

100% Regret! Had an Anycubic i3 Mega since 2017. Replaced the hot end twice, other than that zero issues. The power supply finally died back in September. Based on prior experience, I thought it was a no brainer to buy a Kobra S1 combo. I printed the test benchy and that was it. I had cutter issues,

You can troubleshoot it but if you have it under warranty, claim it and just get a replacement. The beds often taco themselves (I bought funssor bed and gantry to solve this issue) and the hotends are extremely bad (I bought microswiss to solve this). If you want it working as advertised you do have

Dry it. Dry it well. And when you think it's dry, dry it some more... Assuming you have the S1 Combo/Ace Pro, you're going to want to dry it for days if my experience is anything to go by (living in the UK it's fairly humid/wet, especially as I live in a river town). PETG typically needs 60-70C to d