Kobra S1 Combo

I’ve had my X2D for less and a week and so far it’s been flawless. I’m so happy with it. It’s made me realise just how lousy my Anycubic Kobra S1 was and how I can just print and get a quality printed part. Getting a second AMS and the filament track switch was also a good move and I recommend it if

Eu tenho uma k1c, ela imprime material de engenharia, a versão C possui bico endurecido para material com carbono. Minha opinião sincera, é uma impressora boa, imprime tudo sem dor de cabeça, mas ela tem alguns problemas que vc precisa ficar atento, mas é possivel imprimir coisas ou fazer upgrades p

Just my .02 so take it as you will. Buy an enclosed coreXY printer - the print quality difference versus "open-air" bedslingers is vast, more exotic filaments can be used without so much worry as well. For what it's worth I have an Anycubic Kobra S1 with an Ace Pro and it serves me quite well. The p

I use this one: https://cults3d.com/en/3d-model/tool/anycubic-kobra-s1-poop-chute-catch The downside is it doesn’t detach but I chose it because it doesn’t block the fan vent! A lot of them do! Since Anycubic cheaped out on a lot of stuff with this to get the price down, I wouldn’t fancy altering es

It really depends. Most Chinese 3D printing brands have rather sketchy support, but I didn’t have many issues with Anycubic while troubleshooting my Kobra S1. The printer itself was pretty bad, but the support was okay. However, since they’re currently facing many refund requests, it seems like they

I had exactly the same dilemma for my son's birthday last month. I so very almost baught the P1S; My daughter has Bambu Labs and we've been very impressed with her printer. In the end I messaged one of the horror stories on here to ask how (after a couple of months) his dilemma had turned out and th

I bought the Kobra S1 Combo as a pre-order last year. I can tell you that I am very satisfied with the 3D printer, but also with the Anycubic support. Now I have 700 hours of printing, and only a few minor problems, but user problems, not printer problems.

I didnt print TPU on my Anycubic Kobra S1. Only on my Snapmaker U1 but i think this is kind of the same procedure. Dont use the ACE Pro. For tpu you feed directly into the print head. I print TPU(95a) with 240° nozzle and 45° bed and it works fine. But think of going way slower than with normal fila

Anycubic Kobra S1 Combo. Does everything the Bambu does without the price tag

Im in a similar situation to you, except that I went from a kobra s1 (its still in its box being used as a doorstopper...) to a p2s combo instead. for my p2s, in bambu studio, I can set as auto, on , or off for : flow dynamics calibration, bed levelling, vibration compensation. I cannot turn ai dete