Kobra S1 Combo

So this is my first Bambu Labs printer. The printer I was using previously was the Anycubic Kobra S1 combo and when it comes to color swapping I was always running into layer swifts but with H2C no issue outta the box at all.

I’d still recommend the Bambu Labs P1S in this case. The controversy around Bambu is mainly about their closed ecosystem and the move to block third-party apps, not about the quality or reliability of the printers themselves. As for the Anycubic Kobra S1, I’ve watched a number of reviews and seen qu

I’ve had my X2D for less and a week and so far it’s been flawless. I’m so happy with it. It’s made me realise just how lousy my Anycubic Kobra S1 was and how I can just print and get a quality printed part. Getting a second AMS and the filament track switch was also a good move and I recommend it if

Eu tenho uma k1c, ela imprime material de engenharia, a versão C possui bico endurecido para material com carbono. Minha opinião sincera, é uma impressora boa, imprime tudo sem dor de cabeça, mas ela tem alguns problemas que vc precisa ficar atento, mas é possivel imprimir coisas ou fazer upgrades p

Just my .02 so take it as you will. Buy an enclosed coreXY printer - the print quality difference versus "open-air" bedslingers is vast, more exotic filaments can be used without so much worry as well. For what it's worth I have an Anycubic Kobra S1 with an Ace Pro and it serves me quite well. The p

That’s an interesting assumption. You’d be wrong. But interesting nonetheless. Honestly, no clue what caused and I likely won’t until I get the blob off and take a look at the nozzle. I had this happen on my old Anycubic Kobra S1 printing PETG-CF and it was because the nozzle started leaking (someth

I got a couple Anycubic Kobra 3 V2s combos from AliExpress for ~$200 each. Have about 1500 hours on each one and have had minimal issues and maintenance required. I recently got a refurbished Anycubic Kobra S1 combo on eBay and it appeared brand new. Had a few initial issues, but support is very hel

i habe both. Why? U1 for Multicolor or Multimaterial P2S for ABS/ASA for Car Stuff und more. Both can be fitted with a Panda Breath for active Heated Chamber so i only need to buy 1 Heater. And when i do big Prints or Multi part prints i just run them parallel. Also filament Storage & Drying with th

wait for the anycubic X? Or bambu lab a1 combo. Or AD5x. Or you could also wait a little and grab a elegoo centauri carbon 1, they just announced the multicolour system is coming out soon for it. I'd stay far away from the kobra 3 or kobra s1 though, i've personally had horrible experience with them

Mine was +1.0 too and I brought it down with belt skipping to +0.28. No need for a Funssor kit, the auto-levelling compensates that pretty well. https://wiki.anycubic.com/en/fdm-3d-printer/kobra-s1-combo/nozzle-scraping-hot-bed?_sasdk=fcmljY2FyZG8uemFjY2hlbGxvQG91dGxvb2suY29t https://youtu.be/ZiwXP9