Kobra S1 Combo

Just my .02 so take it as you will. Buy an enclosed coreXY printer - the print quality difference versus "open-air" bedslingers is vast, more exotic filaments can be used without so much worry as well. For what it's worth I have an Anycubic Kobra S1 with an Ace Pro and it serves me quite well. The p

I got a couple Anycubic Kobra 3 V2s combos from AliExpress for ~$200 each. Have about 1500 hours on each one and have had minimal issues and maintenance required. I recently got a refurbished Anycubic Kobra S1 combo on eBay and it appeared brand new. Had a few initial issues, but support is very hel

i habe both. Why? U1 for Multicolor or Multimaterial P2S for ABS/ASA for Car Stuff und more. Both can be fitted with a Panda Breath for active Heated Chamber so i only need to buy 1 Heater. And when i do big Prints or Multi part prints i just run them parallel. Also filament Storage & Drying with th

We love our 3d printers. Definitely helps owning 3 to speed up the printing process. Springtrap was started last year and at the time took about a month or two to print due to speed and time. Adding two more printers helped reduce the print time for Golden Freddy down to a couple weeks (including ad

I would strongly recommend an enclosed core x/y printer versus a bed slinger. Check these out; Bambu P1S Combo Bambu P2S Combo Bambu X2D Combo Qidi Q2 Combo Qidi Plus4 Combo Elegoo CC Elegoo CC2 FlashForge AD5X Anycubic Kobra S1 Combo Anycubic Korba S1 Max Sovol SV08 (Add open source multi color of

It really depends. Most Chinese 3D printing brands have rather sketchy support, but I didn’t have many issues with Anycubic while troubleshooting my Kobra S1. The printer itself was pretty bad, but the support was okay. However, since they’re currently facing many refund requests, it seems like they

Fwiw I love mine, minor grumbles and all - my first FDM so it's been a learning experience. If I had any advice, it would be the common issues I've seen popping up here and experienced myself: - Be wary when changing/removing/replacing hotends - be sure to seat the hotend all the way up when you pul

I love my anycubic kobra s1 combo & you can self repair every part I’ve needed to & the parts aren’t expensive at all.

Personally I'd go for a CoreXY enclosed if possible, for a few more $. A bit more complex, but better print quality in general, enclosed can help as you get beyond PLA and PETG for filaments, etc. A few that are decent options at mid-level price ranges: AD5X: https://amzn.to/4tfYNXi Q2C: https://amz

Here's some general options. Of course, also Prusa, e.g. Core One, but depends on price range you're trying to stick to. And yeah, I went Prusa instead of BL for some of the listed reasons. Plus really, the INDX will be better than the H2C/Vortex, although it's still neat. AD5X: https://amzn.to/4tfY