C120

I have 4 c120 cameras. I have the same audio “clicking” problem with all 4 cameras. Several others have reported the same problem for the last 6 months. Although the c120 is very good at video, if you need audio it is not the camera to buy. All of my Tapo cameras were working with HA (using the TP L

Thanks Dinevir! This helped tremendously. I have an TP-Link AX11000 acting as an Access Point. Working with ChatGTP and your recommendation I did the following: Changed the 2.4Ghz band to Channel Width → 20 MHz (and pick a fixed channel 1, 6, or 11) Unplugged the cameras for 10 seconds and plugged t

I got the TP-Link Tapo 2K QHD Security Camera Indoor/Outdoor C120 recommended by wirecutter, pretty inexpensive and good quality live feed. The only thing I don't love about it is that you can't make it turn or swivel remotely (you have to go in the room and manually adjust it) which is a problem wi

I did this with a pair of TP-Link Tapo C120 WiFi cameras, recording to microsd cards (usb-c powered), an existing VIOFO hardwire kit, and a cellular hotspot. I get roughly 3 days worth of continuous recording from two cameras before the hardwire kit’s voltage sensor cuts off. The cameras record in 2

My only complaint with my Tapo C120's is that even with a relatively nice TP-Link Deco BE63 WiFi 7 tripple base mesh system (supposedly capable of supporting 200 devices), the cams absolutely saturate the wifi. I have a total of 9 cameras and I've disabled all detection on them, no SD cards so they

Yep. I have the TP Link Tapo C120 and using RTSP with OctoEverywhere. I've had issues with the 2k res (stream 1) causing OctoEverywhere to go offline and drop the stream due to rtsp buffer resets. Moving it over to stream 2 (1080p) seems to have resolved it for the most part. 2k Resolution:rtsp://us