SV08

Sovol ain’t no version of a Voron printer. Especially not the M1D. The Sovol SV08, SV08 Max and Zero were inspired by the Voron 2.4 and the Voron V0. Thus they are quite serviceable and upgradable but NOT a Voron so it’s still harder as mods might not work and you’ll have to figure out what does and

I wouldn't go as far as to tell them to go fuck themselves. Their designs are entirely published on their Github repository, the SV08 is even licensed under GPL v3.0. This is far and beyond what any other companies have made (looking at you, Creality and modern Prusa). That being said, at least the

The M1D isn’t a Voron copy, it isn’t even a Core XY. So no, it will not help you learn about Voron printers. The other Sovol printers like the SV08 and it’s different iterations are copies, but not exact, so they might help a little but not much. Sovol does donate to the Voron project for every prin

I modded my sv08 into a stealthchanger and replaced the mainboard with a btt kraken. The first thing you should upgrade imo is the dinky 150w psu with something like the lrs350-24. I think upgrading the mainboard is worth it because the stock board is cheap af, and you will save yourself from a lot

I backed the U1 simply because snapmaker is a well established company. Did the same with the Sovol SV08 Max. I’m also really looking forward to fitting the Bondtech INDX on the SV08 Max. I can only imagine how many extrusion heads I’ll be able to fit in that thing. (Slaps roof)

It's really annoying that they seem to be abandoning the flying gantry so none of the advancements made here will be able to be ported back to older printers. I don't see them offering an official toolchanger upgrade path now for those units (you'll need to install an INDX or other toolchanger DIY).

SV08. Remaining $350-500ish assigned to couple upgrades (hotend, enclosure, extruder. With enough intention on top of that, it can totally blast out any machine hands down. IMO.

I'd say a SV08 greatly benefits from Mainline + Eddy + Triangle Labs or Microswiss Hotend. This with some good macros gets you 90% of the way. Then f.e. a case + chamber heating for some more challenging filaments like ABS/ASA or similar. Lastly INDX or Stealthchanger if you want multimaterial.

Não recomendo pegar pensando em fazer negócio disso. Pegue primeiramente para você, como hobby ou ferramenta para o dia a dia. Se surgir oportunidade de fazer negócio, aí você aproveita, mas entrar pensando que vai ganhar dinheiro, você vai se decepcionar. Tendo dito isso, recomendo pegar uma fechad

The only official mini voron is the 0.2. (and technically the 0.1 I guess) idk much about "engineering materials", but no voron uses a chamber heater. It's not endorsed nor allowed to be discussed(see rule 7 for this sub). Precision/quality is all on you. Build it right and it'll be as precise as yo