hAP ac2

MikroTik requires manual configuration for everything. Go to System -> Disk, you usually have to format it to a compatible file system and mount it first. You have to manually enable the file sharing service, go to IP -> SMB, check Enabled, and then set up a share and a user under that menu. While t

No tiene que ser un router autorizado ni nada de eso. Compra uno que te guste y tenga un buen precio. Yo tengo este MikroTik hAP AC2 2.4/5.8GHz y me funciona super. Después que actives el DMZ estarás bien.

I pound sh*t out a rb5009. And it does fine .. now I know a hex or a hap ac2 are not even the same. If I had a hEX device I could probably be ok . A MikroTik device with standalone AP is what is solid for me . I have some MikroTik devices with wireless and had some incompatible issues and throughput

Me three. (TMI follows, thanks to my neurospicyness.) Couple of years ago I built and maintained a full UniFi setup for a small(ish) office environment but obviously was a bit disappointed with all the hype I had heard, as I noticed the “shortcomings” of UniFi management coming from a very nerdish b

Best answer is set up the hAP AC2 as an AP only and run a wire back to your ISP router. If you insist on doing it wirelessly. Is your AC2 running RouterOS v6 or v7? The video you linked only applies to v6. v6 is still supported (as of now). So for AC2, I’d recommend staying on v6. v6 will give more