hAP ac2

MikroTik requires manual configuration for everything. Go to System -> Disk, you usually have to format it to a compatible file system and mount it first. You have to manually enable the file sharing service, go to IP -> SMB, check Enabled, and then set up a share and a user under that menu. While t

No tiene que ser un router autorizado ni nada de eso. Compra uno que te guste y tenga un buen precio. Yo tengo este MikroTik hAP AC2 2.4/5.8GHz y me funciona super. Después que actives el DMZ estarás bien.

MikroTik hAP ac lite, nambah 300 dapet hAP ac2 yang ramnya 2x lipat dan udah gigabit Minusnya flash 16mb

I pound sh*t out a rb5009. And it does fine .. now I know a hex or a hap ac2 are not even the same. If I had a hEX device I could probably be ok . A MikroTik device with standalone AP is what is solid for me . I have some MikroTik devices with wireless and had some incompatible issues and throughput

Pravdepodobne externa LTE antena (Greenpacket OA335P) a wifi router (MikroTik hAP ac2). No 336€ je trosku prestrelena cena za obe.

regarding your test with the hAP ac2 you spotted exactly why the older architectures are prized for this specific use case. Even with the wireless driver, the IPQ40xx chipsets in the ac2 have tighter hardware-level frequency locks than the older AR9xxx chips found in the BaseBox. The BaseBox 2 is fr

I'm working with about 500 Mikrotiks spread out over 5~6 counties, most of them are outdoor installations in places with really dirty and unreliable power. My repeat service calls are almost always power related. UPSes fix entirely too many problems, but you can't put a UPS behind every single route

Me three. (TMI follows, thanks to my neurospicyness.) Couple of years ago I built and maintained a full UniFi setup for a small(ish) office environment but obviously was a bit disappointed with all the hype I had heard, as I noticed the “shortcomings” of UniFi management coming from a very nerdish b

Thanks, this is very annoying but I am thankful that MikroTik at least finally realized they can't keep up with all the wireless innovation and so are using Qualcomm drivers instead. There's at least 10 MIPS devices right now so I don't want to spend $100 times 10 for replacement hAP ax2, although I

The Audience with Wave 2 drivers and seperate security profiles for each SSID is the best thing I've seen from Mikrotik. The hAP AC2 with Wave 2 is solid, but much less range. The cAP AC2s with Wave 2 drivers are even less range, but have PoE out. Seamless only happens with CapsMan. I still wouldn't