Firewall Mini PC N100

Since you mentioned it’s mainly for media streaming. Get an intel gpu with integrated graphics over any AMD chip. Quicksync will benefit you so much, AMD (even dGPU’s) are much worse than Intel’s iGPU. If you ever plan on expanding with say immich, the argument would even be enhanced. I would recomm

No, it's still a NAS. What you would be building is a NAS. SAS is a different type of connection capable of higher speeds, 12GB/s whilst SATA is 6GB/s. Now in a NAS, you're not going to notice this, at all. It's simply the protocol. An SAS HBA (Host Bus Adapter) would simply allow the use of cheaper

I have 5xHDDs, 4xSSD, and 1xM.2 connected to this N100 board. I have this USBC card in it and this M.2 SATA adapter in it. I stuffed it all into a Jonsbo N2 (pic), but you could put it in any old pc case. You could swap the USB card for a SATA card and get all of your drives connected. A $163 ITX bo

To quote Hamlet "“There are more things in Heaven and Earth, Horatio, than are dreamt of in your philosophy.” Ok, so I will take your question of "OMG, why?" in good faith and assume you don't mean it to be rhetorical. Why on earth would you spend $200+ on a quad NVME adapter, The card was $100US an

The N100 is a great platform. I've had a few variants and I am a fan of the CWWK CW-NAS-ADLN-K. I think the sacrifice of 2 NICs in preference for a real x4 PCIe slot is a good call. Also being this is a Gen2 board, it moved from a JMB585 to ASM1166 SATA controller with helps dramatically with power

You won’t do much better than a CWWK N150 board m-itx board like https://cwwk.net/products/cwwk-12th-gen-i3-n305-n100-2-intel-i226-v-2-5g-nas-motherboard-6-sata3-0-6-bay-soft-rout-1-ddr5-4800mhz-firewall-itx-mainboard I’ve got this as my mini lab NAS in my 100W mini lab and it draws 28W doing a pari

I have a dedicated ethernet port on the proxmox node that I can use to reliably access the node even if the router is down. Still, I'm worried that the upgrade process will be in a situation where the router is down but it still needs internet access. Is this a concern? I just moved OPNsense from a

I don't have them around anymore, but they were J-series on N100 CPUs under the Qotom, TopTom and Awow label. I haven't bought CWWK systems in over a year now. I primarily used them to setup pfSense firewalls, or as shop systems in a couple manufacturing clients, and as long as you don't try to add

There are a wide range of options for someone with your seemingly low needs, but high budget. You can run all you mention on any $150 N100 mini pc, but the N150 is out so that may be preferable. Here is an example. However, those machines don't offer any ability to upgrade or add storage. You mentio

I recently bought a motherboard with an integrated intel N355; https://cwwk.net/products/cwwk-12th-gen-i3-n305-n100-2-intel-i226-v-2-5g-nas-motherboard-6-sata3-0-6-bay-soft-rout-1-ddr5-4800mhz-firewall-itx-mainboard?_pos=1&_sid=d7c1121e5&_ss=r&variant=46991340175592 I run a home assistant vm, a full *