A1 Mini

Bambulab A1 mini van most jelenleg . Bár én most már ott tartok hogy kell még egy nyomtató mert nem győzöm 😅😅

Blob due to bad adhesion. https://wiki.bambulab.com/en/a1-mini/maintenance/hotend_blob

If you want a cheap reliable printer get a BambuLabs A1 mini. The rest at that price point are bad. It’s the difference between working with your printer (e.g the thing works) or working on your printer (e.g. the thing need constant repairs and and upgrades to produce a 3d printed object).

Thanks! This one is matte PLA printed with a Bambu mini at .20 I had not tried to address the lines in the curve - I was hoping perhaps a higher print quality would help that. The lines I see go all the way around the model at about the spot where the “floor” is complete on the inside. I’ve had folk

I think it might be possible but see if you can slow your print speed on the final top layers. This would depend on your slicer but in Bambi Studio you use a modifier part to set the speed during the print: https://forum.bambulab.com/t/is-there-anyway-to-adjust-speed-of-certain-layers/27981 Perhaps

I do have decent upper body strength however as I approach my 60’s arthritis has become pretty severe and I’ve been pretty much homebound for over a year as I can no longer reliably transfer to my car with confidence and I live alone. I’m fortunate that I’ve had a successful career and own a nice ho

Bambulab dışında marka düşünme bile. Farklı yazıcılarla totalde 3000 saati aşkın baskı aldım, piyasadaki tek gerçek ve sıkıntısız yazıcı bambulab 😀. A1 mini düşünebilirsin belki. Ya da A1'in stoklara girmesini bekle.

Jetait dans le même cas que toi encore hier ! J'hésite depuis un mois entre la p1S et la p2s qui sont des machines très fiables de chez bambu le choix était compliqué car elles sont relativement similaire ! J'ai économiser et ajouter 130€ pour la X2D elle change le game direct avec la chambre chauff

As one in the same situation I've boiled it down to the following basic list; BAMBU LABS Good reliable machines, with a lot of bells and whistles, but still for highly affordable price. The bambu handy app allows one to start prints from one's phone which is surprisingly convenient. On the other han

I'm sorry, i got a bambulab p2s with a 0.4 nozzle, on all my prints i can see literally all layers, tried even to slow down the speed of external walls but still looks a lil ass.... changing the nozzle from 0.4 to a 0.2 can actually help? Please help me im a noobie