Photon Mono M7 MAX

I had so many issues with my M7 Max. After three weeks of trying to get it to work, I returned it. And I've been printing for years and have had multiple printers, so I know a little bit about what I'm doing lol. From my research, there's a couple issues that result in prints not sticking to the cen

Using this with the M7 pro the "camera" thing is "coming soon" (probably just for the P1 - though I added my own camera, I doubt there is a plugin to add the IP address for it). Likewise the "smart monitoring" (shows the peel force etc) is totally empty - so the M7/M7 pro is not sending that data to

There's a bunch of bookmarks to the right. M7 Max isn't exactly a beginner printer though. Why did your friend sell it cheap? I would run through some basic checks. Check the build plate is flat, Anycubic seems to have issues with QC and lots of plates are being delivered concave. Level the printer

The M7 series is a different animal than the other printers by Anycubic. I just recently purchased my first M7. Although it is not a Max, I can understand what you are talking about. This is my 9th or 10th printer, and it is literally the first one that has a loading process at startup. I'm not sure

Check the build plates for flatness. QC has gone down these days and more concave build plates are being shipped. Especially with Anycubic. For the Saturn, check the auto leveling system. You can run a paper test, which is the first part of this process https://imgur.com/a/01HULhV which also describ

What resin???? I never met anyone that didn't say it works fine with anycubic resin, it's other brands that don't stick very well on the M7 Max. Also most people leave smart release on and if like me they use high quality ACF that doesn't stretch the machine detect the release at 0.3mm and then retu

Anycubic printers are not great for printing directly on the plate because they can’t use per layer settings to have long bottom wait times you will need. Although, if your mold has no holes to relieve suction, you will need long wait times for the entire print anyways. Anycubics also only have Ligh

Will Anycubic update firmware to support multi-exposure printing? Same question for slicer support for multi exposure printing. This can be used to provide extra curing to supports and support interfaces as well as patterned exposures for shrinkage reduction and other material property controls. Wha

Best value for terrain and other mid-fidelity prints is a used Anycubic M3 Max. Same Z-axis and resolution as the M7 Max, just crappy AF firmware on the M3 Max and no Anti-Aliasing. Both are a middling 6/7K resolution. Wouldn't touch the Uniformation GK3 Ultras in the used market until they get unde

Oh, no, Anycubic machines have software 0 set, they will let you destroy your LCD if you are not careful! :DAt least, the M7 max has a pressure sensor and it will detect over pressure, but it can't help 100% against LCD crashes... Something will break if you force it down!