SV08

I wouldn't go as far as to tell them to go fuck themselves. Their designs are entirely published on their Github repository, the SV08 is even licensed under GPL v3.0. This is far and beyond what any other companies have made (looking at you, Creality and modern Prusa). That being said, at least the

I modded my sv08 into a stealthchanger and replaced the mainboard with a btt kraken. The first thing you should upgrade imo is the dinky 150w psu with something like the lrs350-24. I think upgrading the mainboard is worth it because the stock board is cheap af, and you will save yourself from a lot

SV08. Remaining $350-500ish assigned to couple upgrades (hotend, enclosure, extruder. With enough intention on top of that, it can totally blast out any machine hands down. IMO.

I'd say a SV08 greatly benefits from Mainline + Eddy + Triangle Labs or Microswiss Hotend. This with some good macros gets you 90% of the way. Then f.e. a case + chamber heating for some more challenging filaments like ABS/ASA or similar. Lastly INDX or Stealthchanger if you want multimaterial.

Não recomendo pegar pensando em fazer negócio disso. Pegue primeiramente para você, como hobby ou ferramenta para o dia a dia. Se surgir oportunidade de fazer negócio, aí você aproveita, mas entrar pensando que vai ganhar dinheiro, você vai se decepcionar. Tendo dito isso, recomendo pegar uma fechad

Voron is hardcore project in many areas. Requires time, observation and total commitment. Understanding you’ve got high bar, consider an SV08. Solid machine, Voron-based with full potential to reach absolute hardcore performance.

I deem that unlikely, as the two biggest markets for BBL are hobbyists/enthusiasts and farms. Even if every cosplayer would only buy BBL, the market for bigger volumes would be tiny compared to small and mid-sized printers. Issues scale exponentially with volume: belts get longer, reduced stiffness,

A1 se quiser dor de cabeça. Praticamente todas as A1 que estão a venda no BR hoje são do lote antigo, que sofre do problema do NTC que pega fogo. Só compre uma A1 se tiver sido fabricada após março/2026. É certo que ao comprar você já vai precisar trocar a placa mãe, e as revendas brasileiras não fa

Honest question, why not use a sovol tool head? I have the zero which uses a CAN board and has an eddy on it. It prints like a charm. I’m relatively sure there’s an official upgrade for the SV08 that brings it up to the same style (I think maybe the max uses the new style too).

I started with a mk3 long ago and purchased an SV08 about one year ago. It’s still working well in its standard configuration. Some things are not perfect, some things could be a little more polished.But I don’t consider myself a tinkerer when it comes to my 3d printer and I’m still quite happy with