SV06 Plus ACE

my sovol bed is the most taco you have ever seen i got a used sv06 plus ace for 150 on ebay untested, gambled on it. the gantry is destroyed. it had a piece of manufacturer foam stuck in the belts and both i and the previous owner tried to use it like that, leading to extended periods of the motors

For cosplay you'll probably need a bit more space. I might recommend a sovol sv08 or sv06 plus ace. I have an artillery sidewinder x4 plus s1 that is an absolute beast for only like $230 but it does require a bit of understanding of what's going on and probably isn't the best beginner printer

You’ll notice that almost everything I printed here is with Sunlu PLA, which I honestly think is amazing. To give you an example: I printed a pink bird feeder in PLA and put it outside on my balcony in full sun all day in May (I live in the countryside in Italy, where it gets insanely hot — like 40°

If I needed a big, relatively inexpensive, large printer I'd get the SV06 Plus ACE. Sovol fixed the problems with the regular SV06 Plus, like the lack of dual Z motor controllers and bracing for the frame. These can be added to the SV06 Plus, but you'll have a bit of a learning curve to overcome. I

It depends on your definition on "good printer". They are having good price to performance ratio, but you will need to do more little bit more maintenance on them than on Prusa or Bambulab printers. Also printing profiles for them will need some slight tuning from you to get perfect results. Yes, So

so the M5C is no longer owned by anker as they sold their entire 3d printing line to eufy. also that printer is 5ish years old now if I remember correctly. I would be more worried about parts/support buying one personally. you don't need to be an engineer to enjoy 3d printing. there is such a range

I'm happy to see another Sovol user working on these. I signed up for it about 10 days ago. I am super excited to be able to use my 3d printers to help these kids. Unfortunately it has been an exercise in patience, as I'm still waiting for the PETG for the first build. It should arrive tomorrow. And

Well, it kinda depends on what subreddit are you looking. Most of them are filled with fanboys. I can tell you just my experience with the new generation of fast printers because i owned a few. Anycubic kobra 3: was an ok printer, didn,t had issues with it , but the mmu system was a manace. Maybe i

after many month of getting part and dealing with support i finally got my sv06 plus ace working.. It's a hassle and seems like it will never work, but in the end i know this machine backwards and forwards , there isn't anything mechanical on this i couldn't fix without help from support. So after a

Go big or go home. If I was looking for a big printer I'd probably go for a sovol sv06 plus ace