SV06 Plus ACE

I am/was in a similar boat as you. I got the SV06 ACE and the SV06 Plus ACE and they were great printers for a couple of years. It was a little tricky to dial in things like flow rates though. This year they started having problems, especially with the Y-axis movement, and it happened right around C

Whatever you do, don't update the "SV06 Plus ACE" with the "SV06 ACE" firmware. It will ruin the build plate and the nozzle by dislocating the nozzle wiping area to the middle of the build plate instead of the corner. That will cause the nozzle to grind into the PEI coating and scrape it off. Sovol

Avoid elevation at all costs. Their printers are mid quality at best, and their firmware violates the GPL 3.0 license of Klipper. Bambu is decent, but their locked down ecosystem is why I avoid them, but that isn't the most important for most users. I recommend Sticking with the A1 Going for a Sovol

Prusa does not advertise their printers as being open source. Sovol does. A reasonable expectation for a printer advertised as open source is that the sources for all printer components are available. This is not true for the Sovol printers. Some of them are more modifiable than others because they

I am new to this, and started with the ECC and a Bed-slinging Sovol SV06 Plus Ace. If I had know then what I know now, I would have gone the Bamboo Labs route OR built a Voron. But I can work with these. I had a stepper motor shaft snap on the Sovol. Cheap Fix ($19 US with free shipping). But it is

I've been using the SV06 Plus ACE for about two weeks now – and honestly, it's been a real rollercoaster. It started with the bed being completely loose. Then I noticed a weird humming noise coming from the Y-axis. The bed also doesn't heat evenly – I'm seeing temperature differences of up to 7 degr