PM981

If you’re kernel panicking when you start the download it’s likely a compatibility problem with your SSD. Since it’s a Samsung 980 it’s probably incompatible, Samsung NVMes are not supported. Some might work but others like the PM981 are absolutely not supported and despite what a few people who hav

tried nvme=-1, it doesn t work, the bootloader gets stuck(but doesn t throw a kernel panic though), the bios sadly doesn t support disabling pci e lanes, but i will look into the ssdt files. the thing is one of my nvmes is a Samsung pm981 which seems to be notorious for this kind of kernel panic, wi

You’ll need: External SSD / enclosure Steps: Install Windows to the external SSD Boot into Windows Install VMWare Install macOS via DMG to the NVMe SSD through VM Build an Opencore EFI on a USB stick Boot the Samsung SSD from the USB stick EFI Deal with endless glitching and unreliable boot because

This is what the Dortania guide states. AMD's Desktop Bulldozer (15h), Jaguar (16h) and Ryzen (17h) CPUs Laptop CPUs are not supported Note not all features of macOS are supported with AMD, see below However, this should work fine with your CPU. https://github.com/trulyspinach/SMCAMDProcessor Samsun

macOS installer time estimation is indeed trash, normally it tooks around 1 hours to finish the installation depend on drive speed and network speed. but check your SSD. You're using a Samsung PM981 (MZVLB...), which is notorious for freezing at the 12-minute mark in macOS. You might needNVMeFix.kex