MK4S

Da. la fel cum exista si laser engravers. La preturi cel putin duble chiar daca am considera aceleasi performante. Daca luam un a1 combo entry level de la bambulab -> https://eu.store.bambulab.com/products/a1?from=home_web_a1_detail e 370 euro acum. Eu am dat in jur de 450 acu ceva vreme, dar am mai p

Actually imho the best way to ugrade the mk3s+ is using a Prusa Minis Buddyboard and Snake-Firmware from Github. Its called "mk3.3". It miss powerloss Recovery, MMU suport, NFC and crashdetection, but comes with a much lower price. The board itself is about 45€ at Prusa. The display, while about 100

This just tells me you haven't used a Prusa with Prusaslicer. Here is an image of woodfill PLA printed on a fully calibrated Bambu X1E vs a Prusa XL with zero calibration aside from the original setup. Prusa on the right. Here is an X1C vs a Prusa MK4 using bambu woodfill PLA.. The Bambu on the left

Very honestly, MakerBot is essentially dead from a consumer point of view now. It likely isn't worth trying to bash your head against the wall with this, instead of just getting a more current (and still supported!) machine. I say this as my old original 2012 Rep2 sits in a corner of my garage colle

I had alignment problems with the outer frame as well. What worked for me was to loosen that entire corner. Align the frame and tighten them down. But seriously, that needs to be fixed. Should not have to deal with that. I have built a MK3S, MK4S x2, Original Enclosure x2, and MMU3 x2. Technically x

My first printer was the original ender 3 not long after it released. Since then I've had prusas, fabricators, more enders and currently I main a mk4s, it's frustrating but be patient, you can have alot of fun learning and you'll never forget those late nights waiting for the first layer to print fo

I've been using it fine for some time using a profile I got from printables.com ages ago. I don't even remember which one. It broke today after I changed a load of stuff and I realised it's less common than I thought to have them working together. You might find it is worth experimenting with turnin

I found a thread on Prusa forums that set me straight. https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4s-how-do-i-print-this/how-to-print-multi-material-models-without-an-mmu-tutorial/ I'm not sure how much the extra Gcode in this post makes a difference but having it tell you whi

It's weird once in a while I see a user who claims to have had Purses for many years without problems while I see a lot of people having problems with their Prusa and having to tinker with them and even seen numerous people return the CoreOne and get the H2S or H2D with no regrets while remarking ab

The retracting and pushing of TPU through PTFE tube is the issue. You can bypass the MMU3 if you want to print TPU. But it cannot be used to mix with other filaments through the MMU3 It is fairly easy to assemble. There are videos step by step on youtube. Prusa's instructions are really great as wel