Optix MAG274QRF-QD

для роботи і дозвілля використовую MSI MAG 274QRF-QD E2, ips, 27 дюймів, 2к, 180 герц, герц для роботи напевно стільки не треба, але достатньо інших зручних наворотів, які комусь можуть пригодитися, наприклад KVM. Єдине що на підсвіти в коментах до цієї моделі жалілися, але мені повезло, їх практичн

In my experience it works perfectly. I have an LG 5K2K in the middle, two 27" 1440P IPS Displays (MAG274QRF-QD) on the left side and on top with a vertical monitor stand, and on the right is an old 27" 1080P display. So, a decent mix of resolutions, but setting them all up in Windows is painless and

I have an MSI MAG274QRF-QD. Its a few years old so I am sure there are fancier models out there now but this meets my needs. It is a 27", 1440P, 165hZ monitor with variable refresh, HDR and fast response time. . Pros: . 27" / 1440p is the ideal compromise for me given what I am prepared to spend on

I have an MSI MAG274QRF QD 1440p monitor that accepts a 4k signal hooked to my pro. It has built in VRR so it looks really smooth while playing too.

Hey. Did you end up getting the Gigabyte M27Q2 QD? I am deciding between the MSI MAG 274QRF QD E2 and the Gigabyte. But I read that the M27Q2 QD has bad uniformity, the panel being darker on the sides. The 65w PD usb C is also a plus for me on the MSI. But if QC is an issue, thr Gigabyte might be be

I had exactly the same symptoms on my monitor, but with a different monitor make and model (MSI Optix MAG274QRF-QD). I found that it was happening because Input Source Autoscan was enabled on the monitors. Windows would detect the monitor briefly for a split second, then set it back to disconnected.

Hi I'm coming back here to give an update about this situation. I returned my motherboard and got a replacement but the issue (at least this particular one) did actually come from my monitor that I got for Christmas! It was a MSI Optix MAG274QRF-QD and the upstream USB port was faulty: I tried diffe

Sorry to necro this, but having bought a MAG274QRF-QD E2 and having the same symptom, it appears the drivers are meant for the KVM switch feature. It doesn't happen in my work computer, though: only my personal desktop. Both are Windows 10. The workstation is plugged in through USB-C and the desktop

Perfect questions! Backlight bleed During a grey-scale test, there’s a vertical 5-6 cm band that appears slightly brighter due to the backlight. This band is barely noticeable during the test and completely invisible under normal use, even with static images. It’s far superior to the other monitor I

someone correct me if im wrong, but vrr is like if youre doing a higher hz than 60 monitor. 120, 144, 165 etc. i think. could be totally wrong. im going for the vrr .ini file as 165 hz monitor. if im wrong or we're not sure, could just cap monitor in display to 60hz and go for either? im very open t