ThinkStation P3 Tiny

I use the mold linker (on linux), and use multiple worktrees to limit how much recompiling goes on. Also I point rust analyzer to a different directory, which keeps it from thrashing your target dir. Also having a fast computer helps. I am on a Lenovo P3 Tiny Gen 2 (64 gb ram, intel core 9, 2tb disk

The base configuration in the EU is worse yet more expensive (even if you ignore the current sale in the US and manually add the US tax). Looks like the rest of the world is again subsidizing the lower product prices in the US. US: https://www.lenovo.com/us/en/model/workstations/thinkstation-p-serie

The Dell OptiPlex, Lenovo ThinkCentre M-series, HP EliteDesk 800 Mini / EliteOne, ASUS NUC Pro (purchased from Intel) and Fujitsu ESPRIMO Q-series are likely the top consumer/office systems. They all decent quality systems for what they offer. Minisforum, Beelink, GMKtec, etc are the cheapest of che

More info- The p3 gen2 still is a 'Tiny 8' by lenovos scheme and has the same replacement part. BLD Tiny8 PCIex16 N Riser car Ersatzteil-Nr.: 5C50W00933 I guess it's safe to assume that lenovo didn't redesign the format in between https://pcsupport.lenovo.com/de/de/products/workstations/thinkstation

I have a P330 with an rx6400 and two NVMe drives as my spare steam box. I did put an Arc Pro A40 in it, but without re-bar and/or above 4g decode it's useless. Lenovo locking down the BIOS and whitelisting Nvidia cards is extremely frustrating. Unless you really need the tiny form factor, a Dell pre

we use Lenovo P3 tiny's for our designers and they have no complaints running cad and solidworks

That's super-fancy for HEC-RAS and general GIS work. I have a 13th Gen i9 and it has maybe a RTX A2000 or A3500 at work, but it's overkill. I have a HP Elitedesk Mini 800 G5 (i7-9700t) with just the stock Intel graphics and it will do all I want to do within HEC-RAS and RASMapper - as long as the Wi

I see. Sorry for being a little edgy there. I thought you were one of those people who don’t really want to help but still want to nitpick. I’ve been trying to add a PCIe slot to my M75q Gen 2 for quite some time, so I’ve been digging into this a bit. Here is some information I’ve found about that s

I'm on a miniPC (Lenovo P3 Tiny) and was using a dGPU RX 6400 (4gb). the PC was put together just purchasing used parts seperately I have a 4k monitor that can max at 60hz With the RX 6400 (i think i paid $105 USD) i was able to run CP2077 at 1600:900 Medium 60 FPS w/o frame generation The other nig

The actual MA3 full size is pretty light on specs. I chose this Lenovo P3 tiny workstation because it beats it in every category, sometimes by double, and has plenty of video outputs. https://www.lenovo.com/us/en/p/workstations/thinkstation-p-series/lenovo-thinkstation-p3-tiny-gen-2-intel/30k60009us