UPDATED 49 PRO

Yours was mis-assembled, mine was too, that cutout should be 90 degrees offset from the plunger wings. You can see how it should look here: https://flairespresso.com/wp-content/uploads/2026/03/flair_49_pro_lifestyle_21_woo_optimized.jpg Get a hex driver and unscrew those 4 screws (you can see 1 of them cl

I have the 49 pro, and preheat twice. For me it isn't inconvenient as it has become part of my normal rhythm and cadence. And I've also never tried just preheating once, so I have no idea if I'm overkilling it. OTOH, I'm leaning lighter as I typically roast City or City+, so maybe it should stay in

I own flair pro 3. Problem, back to back shot workflow, need to disassemble the pressure chamber with hot water. You will need to be near a sink for clean up. 49 just knock the puck, wipe with towel and good to go. Built quality, the aluminium holding the chamber is not properly protected, and needs

In order to use a non-Flair basket, you'll need to modify your Flair 49 'Pro' by shimming the brew cylinder with respect to the group head; I used stacked small washers from the hardware store under each of the four screws until I got the height right - about 3mm. This is necessary because the Flair

You can get the rok or flair 49 pro. Or something. Flairs even go on sale and there built to life also.

It’s pure function mechanical engineering - no electrics. I’m an electrical engineer and even I admire the pure functionality of the flair 49 pro. It’s ridiculous how people here are complaining about heating the chamber it takes a few minutes before your pull, and retains the pure mechanical nature

Thanks for the deep info. Do you have recommendations for a specific set of basket+tamper+puck screen to switch to? The stuff that ships with the flair 49 really doesn't deserve the tag "pro". The basket I received with the flair 49 measures 50.0mm, that's more than 1mm different to what Tom measure

Flair Classic > Neo Flex due to the more durable aluminum build. The new model uses thinner steel for the brewhead so no need to preheat if you’re using med dark-dark roasted beans (same with Cafelat Robot). If you have more budget, look into the Flair 49 Pro for a much better worklfow