K1C

My experience is the opposite, between a Creality K1, H2D, and Prusa XL, the Prusa is slow and still prints like dogshit next to the H2D and K1. The Prusa was also the most expensive and isnt even enclosed.

Creality appears to be trying to move towards a subscription model. What are your sources for this statement? i'd love to hear from you again, this is FUD. Edit: this dumbass then referred "Creality Cloud" as if "Creality" and "Creality Cloud" are the same. Creality Cloud is completely free to use w

I have a lot of Creality K1 & K2s + Bambu’s. They’re all pretty much identical in terms of print quality and maintenance. Of course, YMMV. My experience with Creality has been pleasant.

my 2 month old K1C was my first 3D printer and i did learn some stuff i wasn't told before. might not be the biggest or best tips but its something lol when retracting filament, i always take off the PTFE tube, unlock the extruder and pull from the top. I used to just pull from the spool but the PTF

If you look at replacing the main board you will also have to replace the toolhead board as it won’t work with the new mainboard. Honestly if you thinking about doing this the best machine for these types of upgrades is a creality k1 series Edit to add https://github.com/FYSETC/Catalyst_Kit

Buy a Creality K2 and replace the firmware with Klipper, moonraker and mainsail or fluidd , install KAMP and either setup a VPN at your home or do as i did, use Obico (preferably behind cloudflare tunnel) If budget is smaller, search elsewhere, for now, newer K1C 2025 models are not rootable, which

I'll get to uploading it in some time, I'm lazy a bit, was thinking thingverse, is it any good? My printer is creality k1c, plastic is creality brand PLA, they call it "hyper PLA". This printer has its own slicing software so I generally use their preset and just tweak minor things. For this one I l

Bambu - high quality, replaceable parts, good wiki, but they kind of decide what you can and can't do in some ways (like in terms of accessories, 3rd party software, not as in 3D files). They have made using non-Bambu slicer a bit more of a PiTA, so you'll likely use their slicer. Overall, not a bad

Additive manufacturing a.k.a 3D printing has expanded tremendously over the last decade and become much more commercially accessible. Just the categories of 3D printing (FDM, SLS, PBF, SLA, etc) can be overwhelming. It's your first I would stick to FDM. Since your use case is potentially replacing f

Hell yeah thank you, I'll see check if somebody already made a Baffle for this or a similar card and print it :3 I love my 3D printers but I'd be lying if I said they didnt hurt my feelings sometimes haha, I have nicer ones because I dont wanna mess with it too much but they can get real cheap. I ha