K1C

I have a lot of Creality K1 & K2s + Bambu’s. They’re all pretty much identical in terms of print quality and maintenance. Of course, YMMV. My experience with Creality has been pleasant.

That’s frustrating, but the Creality K1 is usually pretty reliable once it’s dialed in. Repeated clogs like that are often small tuning issues rather than anything serious. I’d look at retraction settings and temps first, and maybe check filament quality too. Creality machines are generally easy to

Well since your dutch I highly recommend 123-3d.nl they have a lot of stuff and my experience with them has been excellent so far and their house brand filaments are also really good and cheap I went through about 6 or 7 kg of their filament so far and had only 1 failure because of improper storage

Welcome to the world of 3D printing. We have all been in your spot. If there are very few or small areas of the print contacting the build plate, try adding a brim when you slice the print. You did not mention which printer you have. I had that problems with two of my Creality K1c printers. If you h