Photon P1

Nope. That they can't be used together was something just more recently that has started showing up in their materials. During the AMA, they had said "Not yet-still in internal planning." Evidently the decision was made to not make them play nicely with each other, which is a little messed up, in my

Using this with the M7 pro the "camera" thing is "coming soon" (probably just for the P1 - though I added my own camera, I doubt there is a plugin to add the IP address for it). Likewise the "smart monitoring" (shows the peel force etc) is totally empty - so the M7/M7 pro is not sending that data to

Yeah, idk Anycubic is kind of a shit company in many ways but the hardware is decent if you can deal with the frustrating firmware and non-existant support. The P1 has a good build plate and levers instead of screws which is a step up. I wouldn't say it's messier than Form - though the Form wash has

You're the kind of person I'd recommend the Kobra S1 for: someone with a fair amount of experience with printers, who can fix problems without a ton of hand-holding and can deal with less-than-stellar software and quirks. It can output great prints, with some effort, as long as you don't get a lemon

As it appears Photon Workshop is based on Voxeldance Tango similar to Heygears Blueprint Studio, has Anycubic implemented any Wave release film optimized smaller support tips / reduced support count? Blueprint will optimize supports for PRM* which directly benefits the end user. What about model siz

Yes you are right, photon workshop definitely uses the Voxeldance SDK. I mainly use Tango to support midells, then slice with workshop. Not at the moment, but in the Kickstarter campaign they said they'd release a one-button slicer. I think they want voxeldance to do something similar to bluprints.

Here's the problem, considering it's in the center like that, that suggests insufficient lift height (film didn't peel completely), but you have 10mm already and are using P1. The P1 if I'm not mistaken adjusts lift height dynamically with the smart features turned on? 10mm should be more than enoug

The U1 is a good printer. Thats why I put it as maybe. My issue with it is that reliability has not been proven yet. I look for printers that can meet and exceed my 10k hour goal. My P1, X1, and Core One have all been able to do this, the U1 simply hasn't been around long enough. Previous Snapmaker

Sword looks mushed. That’s a sign of too much Z axis compression. You can measure the Attunement Block and overall model. Should be 6mm and 10mm. I’d also say you don’t have enough Off Time. Anycubic’s recommendation (like most of their recs) of 0.5s is fantasy land. I would use at least 2s. Not sur