Photon Mono M7 MAX

I had so many issues with my M7 Max. After three weeks of trying to get it to work, I returned it. And I've been printing for years and have had multiple printers, so I know a little bit about what I'm doing lol. From my research, there's a couple issues that result in prints not sticking to the cen

I've been printing model car parts for little over 5 yrs on a anycubic photon mono x 6k and I've upgraded it to the m7 max and I bet you can't guess what printer gets used the most it's my old reliable 6k and formlabs makes a awesome printer just not for hobbies you can go into the settings and make

I just bought the M7 Max and I'm also having annoying issues getting consistent prints. The first thing I did that helped was leveled using a regular sheet of paper, not the included leveling paper. From what I've read, the design of the screen and screen protector makes a little bit of a gap from t

I don't own it, but according to internet, yes. It's mix of concave build plate near center(sometimes) and of gap. If you google adhesion problems on m7 pro, you will see they all got a problem on the very same spot at center. When you print RERF, 4, 6 and maybe 8 wont stick to plate. I could post d

Best to wait for the Jupiter 2 if you can for a large format (13") printer. Hopefully in addition to 16k, it will support a proper range of anti-aliasing grayscale and at least maintain the Jupiter Z-axis if not improve. The M7 Max is a better built machine, but only 6/7k resolution. Anycubic doesn'

Anycubic QC is trash lately. Get one of you like gambling and losing a lot. S4U has issues around auto-leveling/force sensor system, M7 has it worse as it doesn’t have as many tools to deal with it. The S4U 16K also has an over powered UV light source that makes calibrating a challenge. Saturn 3 non

Just printing today with a new M7 Max and I did think that it would possibly struggle to maintain the resin temperature all round the vat as the flip over lid is not even close to being airtight but I printed today and it did not drop below the 27 that I set it at, but that is probably because the a

I’ve seen multiple M7/M7 Pros with concave build plates, as well as M5s and M7 Max. Even J3DTech’s review of the M7 Max showed a concave plate, although he politely declined to criticize Anycubic over it. I have helped multiple people on Discord and Reddit with adhesion issues with these printers an

There's a bunch of bookmarks to the right. M7 Max isn't exactly a beginner printer though. Why did your friend sell it cheap? I would run through some basic checks. Check the build plate is flat, Anycubic seems to have issues with QC and lots of plates are being delivered concave. Level the printer

It’s worse because you can’t use per layer wait before print/light off delay with Anycubic printers. So if you’re thinking of an M7… lemme just say, between Anycubic’s poor QC and no per layer wait times, the Elegoo are just better. Only plus they have is no AA bug because they only use 4-bit AA. Fr