Kobra

Anycubic Kobra 2 Pro. Не самый лучший принтер, я некоторые части пушки долго шкурил и заливал грунтовкой

$50 of it is the motors and mechanical bits. The other $250 is the software that makes it work seamlessly with the printer. There’s a reason other companies implementations are not nearly as good. I’ve tried the anycubic kobra and crealities version and it’s nowhere near as good quality.

My regret is not going with Bambu to begin with. I now own 3 Bambu Lab printers. 200, 600, and 1100 hours respectively, the only tinkering I’ve had to do is basic maintenance to keep everything lubed. Kobra S1 has about 300 hours on it, with probably 299.95 hours being problem solving test prints 🤣

1- Why do I not have access to SSH into this printer? 2-Why did you insist on making your own Makerworld/Orca Slicer/ Klipper Copy/Fork? 3- Why are there 3 different hotend styles for the same name Kobra 3? 4-Why did you choose to run all of the ptfe tubes all the way to the hotend on the K3?- Why i

"Bambu Lab hat wohl die bessere Community" Die Community ist vor allem größer - aber im Großen und Ganzen ein Trauerspiel mit extrem vielen Nutzern, die dümmer als 3 Meter Feldweg sind (was sich aus der beworbenen Einfachheit der Bedienung ergibt). Auf die herstellerspezifischen Communities selbst s

I use this one: https://cults3d.com/en/3d-model/tool/anycubic-kobra-s1-poop-chute-catch The downside is it doesn’t detach but I chose it because it doesn’t block the fan vent! A lot of them do! Since Anycubic cheaped out on a lot of stuff with this to get the price down, I wouldn’t fancy altering es

Welcome to the Club! You got yourself one of the Best Printers currently available. Especially if its your First Printer. Dont be me. My first Printer was the Anycubic Kobra S1. I only found out how bad Anycubic products are after getting mine and only 2 Months AFTER my purchase do my research. But

Good morning, Certainly I bought the Prusa Core One assembled and I agree with the mediocre quality of the first benchy. Then I did it again, prioritizing quality over speed and now I have a superb impression. All my prints are successful ((except 3 which I stopped, error on my part on parameters) i

Unfortunately, I've had much of the same experience. Get used to taking the ace pro apart, you will need to do it often, especially feeder 3. Mine had the additional issue of having a print bed that turns itself into a taco shell when heated, very common issue on this printer. After x amount of hour

I'm rocking a Kobra Neo 2. P1S will be an huge game changer and i'm so ready for it. No more Anycubic for me for sure ahah I need the next level. I want to press print and produce a good piece. Not printing 5 pieces where none comes 100% ok. Thanks for your feedback