Kobra

Just my .02 so take it as you will. Buy an enclosed coreXY printer - the print quality difference versus "open-air" bedslingers is vast, more exotic filaments can be used without so much worry as well. For what it's worth I have an Anycubic Kobra S1 with an Ace Pro and it serves me quite well. The p

Anycubic Kobra 2 Pro. Не самый лучший принтер, я некоторые части пушки долго шкурил и заливал грунтовкой

$50 of it is the motors and mechanical bits. The other $250 is the software that makes it work seamlessly with the printer. There’s a reason other companies implementations are not nearly as good. I’ve tried the anycubic kobra and crealities version and it’s nowhere near as good quality.

The place I consult for uses Creo. Edit: to clarify, I modeled it on-site using Creo, exported as a STEP rather than STL to avoid tesselation related artifacts, imported into Anycubic Slicer Next, defaults for generic PLA and hit go. The Kobra S1 is a nice machine for its price.

My regret is not going with Bambu to begin with. I now own 3 Bambu Lab printers. 200, 600, and 1100 hours respectively, the only tinkering I’ve had to do is basic maintenance to keep everything lubed. Kobra S1 has about 300 hours on it, with probably 299.95 hours being problem solving test prints 🤣

It was the best entry-level standard sized bed slinger for a very long time. It’s still one of the best, but it has some decent competition now, like the Anycubic Kobra X and the Creality SparkX i7

You can download Makerworld models and use them on Anycubic's slicer, Anycubic Slicer Next. I recommend using the slicer for best results and total control over the quality and rigidity of your print. Anycubic also offers its own library of STL and 3MF files on their MakerOnline website, which you c

Kobra X is new and doesn’t have the proven long-term reliability/reputation of the A1, but spec-wise and feature-wise it’s the better printer. I’ve had a great experience, great print quality, and no issues after 30 hours of printing, and it seems like Anycubic has really stepped up their game with

Anycubic KobraX . unter 300 Euro, superschnell, fantastische Druckqualität und kann auch ohne Cloud und geschlossenes ecosytem mit freier Software betrieben werden. 4 Farben . Ich und 4 Kumpel am Ort haben den . Vom Totalanfänger bis zum Halbprofi.

I would classify the u1 as mid-tier. It is sensibly priced, not expensive.Top of the line printers cost 3k by the time you get all the bits and pieces. I have 5 top of the line, and 2 u1's. I use them interchangeably. The only real limitation on the u1 is the number of toolheads. I wish it had 6. Ho