Kobra

This. My first printer was an Anycubic Kobra. It worked okay-ish but needed constant tinkering. Same from all my friends with their Enders. I then bought an Anycubic Kobra 3v2 and Kobra S1. Both worked fine right out the box but I always had to tweak some settings for pretty much every print. Then I

This question is why I haven’t bought a replacement for my POS Anycubic Kobra S1 yet. I really think that Bambu thought that the H2C was going to be the market innovation and got caught napping by the U1. I want to see in the coming year what they come up with to counter it, and I want to see what t

Eu tenho uma k1c, ela imprime material de engenharia, a versão C possui bico endurecido para material com carbono. Minha opinião sincera, é uma impressora boa, imprime tudo sem dor de cabeça, mas ela tem alguns problemas que vc precisa ficar atento, mas é possivel imprimir coisas ou fazer upgrades p

Dude. Upgrade that dang ender first. It’ll surprise the hell out of you. The upgrades available today are 10x better than what was available back in 2020 🙌 my e3pro has the 4.2.7 silent board running a basic compile of marlin 2.0.1, dual z, MS direct drive kit, TH3D EZABL Pro (installed, not connect

Keep in mind you’re essentially a beta tester with the Kobra X, its initial presentation might look promising but it’s not proven long term. My personal experience with Anycubic has not been reliable or trustworthy. After a Kobra 2 and a Kobra S1, I wouldn’t trust anything they make anymore. They’re

You can download Makerworld models and use them on Anycubic's slicer, Anycubic Slicer Next. I recommend using the slicer for best results and total control over the quality and rigidity of your print. Anycubic also offers its own library of STL and 3MF files on their MakerOnline website, which you c

They SPECIFICALLY call out TPU as "do not use" on the printers unless the TPU meets the following critieria: https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-combo/print-tpu I think the error here is between user and machine, not machine and TPU

There are currently three main versions of hotends for the Kobra S1: The first version of the original hotend with a PTFE/ceramic throat tube. These are more prone to clogging issues, and the filament tends to get stuck in areas that make assembly difficult. The second version of the original hotend

"Bambu Lab hat wohl die bessere Community" Die Community ist vor allem größer - aber im Großen und Ganzen ein Trauerspiel mit extrem vielen Nutzern, die dümmer als 3 Meter Feldweg sind (was sich aus der beworbenen Einfachheit der Bedienung ergibt). Auf die herstellerspezifischen Communities selbst s

A seemingly inconsequential relocation of the spool holder on my printer (from right middle on the old I3 to left back, pointing backwards on Kobra 3) has been the source of the worst headaches i ever had over any printer malfunction i ever had. Thank you anycubic for forcing my filament dryer (Spac