I'd go with the TP-Link Deco M5 solid budget mesh, dual-band, easy setup. Covers your size home fine. Wi-Fi 6 is nice, but not a must unless you’ve got a lot of newer devices. Deco M5 (Wi-Fi 5) should be enough.

The latency is really specific to everyone’s own setup and then the things they don’t have control over, external factors right behind the router all the way to Nvidia. What works for you might not work for everyone. I’ll say I have really rarely issues and most of the time I’m using a wired connect...

Pake campuran antara deco m5 sama e4, rumah 3.5 lantai antar deco semua terkoneksi kabel lan. Pemakaian sudah 2 tahunan no complaint at all sih. Bener” mulus ga ada dead spot “perpindahan” antara router jg seamless. 10/10 would recommend

M4: https://www.pbtech.co.nz/product/NETTPL9403/TP-Link-Deco-M4-AC1200-Dual-Band-WiFi-5-Whole-Home M5: https://www.pbtech.co.nz/product/NETTPL9005A/TP-Link-Deco-M5-AC1300-Dual-Band-WiFi-5-Whole-Home More expensive one is mildly faster but meh. Buy whatever one your budget supports. Get a three pack ...

Salutare. E perfect daca ai prize de retea deja. Eu folosesc un sistem de meshing Deco M5 conectat prin cablu. Recomand

I’ve been using TP Link Deco M5 for 4 years. I bought six, three are in my house, one is on my back deck, one is in a garage and one is in an outdoor boathouse. I was able to blanket my whole yard (3 different buildings) in a mesh. The three that are not in the house, have been exposed to outdoor am...

I’m not familiar with huawei products, but do you know what the lan Ethernet ports are? If they’re 1 gig ports, you could just disable the wifi on the huawei and hook up any 3rd party access point. A lot of consumer products on the market will probably be all in one routers with wifi built in, but t...

Deco can absolutely work with an Ethernet backhaul. On one of your M5s, use one port to connect to WAN, and the other to connect to LAN. This is the Router Mode configuration. On the other M5, use one port to connect to the LAN. Because you bought a pack of three M5s, you can put a switch between th...

I've got Gen3 and used both ethernet ports to connect to switches. Also, was using the wifi for a while too, but found it too weak so now use my old Deco M5 Mesh which seems to be holding up fine at the moment.