Archer BE400

I use a TP link BE400 with plusnet (FTTP/full fibre) , other routers will also work just as well and possibly better. There will be a little bit of setting up, bit its not difficult , Plusnet have a guide on how to use your own device on their service here: https://www.plus.net/help/broadband/broadb

Since I already have postpaid and a few other Airtel plans, it came to around ₹1500 for 15 days, which is normal for me. I’m also planning to buy the TP-Link Archer BE400 6500 Mbps Wi-Fi 7 Gigabit Router in this BBD sale.

Hello guys, can someone tell me if this router speed only around 200mbps or 20-30MB/s when transfering data locally, or the speed of share storage.

I test storage speed with Ethernet cable, the speed is correct. But if I use wifi it only has 20 to 30MB/s, but this router should have 2.5gbps theoret

True that. I bought the TP-Link Archer BE400 Wi-Fi 7 router, and the experience has been next-level. I turned off Wi-Fi on the Airtel router, used it only as a modem, and connected the TP-Link Wi-Fi 7 router for internet transmission. Since then, I haven’t faced any latency or speed issues at all.

Just get a better wifi router and stop using the default one as after using TP-Link Archer BE400 I am getting far better gameplay both online and offline on portal and connection is much more stable. I just stopped using the default modem or wifi router that comes with a normal internet connection .

I set up a pair of Archer AXE75 yesterday and so far so good. Easymesh wasn’t that easy to set up but after some fiddling got it going. I can get the 6GHz band to my only device (Alienware laptop) that supports it on the second floor, with main router in the basement, which is great. I did notice ho

Archer be400 is a dual band router. While it works, you could get better performance with a better wifi6e (tri band) router.

I'm surprised you get -60dB in the same room... Like right now my phone says I get -34dBm in the same room, on 5GHz, at 3m distance from a 35$ Xiaomi AX3000T router that I flashed with OpenWRT and turned into an AP with band steering, VLANs and all. Also I get -31 dB 3m away from a Ruckus R710 that'

Base on some info from comments is seen like you are paying for 1 gig speed from your ISP and your first link is the eero - 6+ and for what I see on wifi max 940mbps but in real world will be less. I suggest you to try with a TP-Link BE500. Cat5e should be able to do 1 gig over 100 meter. Also your

The TP-Link BE6500 (AKA Archer BE400) has 2.5GB WAN, 1-2.5GB LAN & 3-1GB LAN ports. It's $149.99 at Amazon right now. The single 2.5GB LAN port means you can only hook up one device at 2.5GB on your local network (such as a PC, or a 2.5GB switch). Hooking up a 2.5GB switch to the port will let you s