SV08

I modded my sv08 into a stealthchanger and replaced the mainboard with a btt kraken. The first thing you should upgrade imo is the dinky 150w psu with something like the lrs350-24. I think upgrading the mainboard is worth it because the stock board is cheap af, and you will save yourself from a lot

edit actually, I see now that those are Voron builds with green accents, not the ratrig vcore. So I guess feedback would mostly pertain to sovol performance I'm currently going back and forth between a RatRig Vcore and Sovol SV08 Max, in search of a 500mm build volume. Since you appear to run both,

You know I picked up an SV08 recently because the deals were just amazing. But as I researched, it seemed like I was going to have to replace the probe, hotend, extruder, do some kind of jury-rigging to make the bed flat, etc. Turns out it works great right out of the box. I'm replacing the hotend j

Well you're certainly never going to beat the upgradeability of a Voron. But in most other ways... It sounds like you want to go with the SV08. Particularly with your desired price point and hopes for something relatively plug and play. I went straight from an Anycubic i3 Mega S to building a 2.4 St

I havent had the same experience as you with my SV08. This thing has been rock solid for me. I do agree that this printer should come with mainline klipper right out of the box. It would make updates and upgrades easier. I believe the taco bed problem is a bit overblown. The bed mesh is there to com

I started with a mk3 long ago and purchased an SV08 about one year ago. It’s still working well in its standard configuration. Some things are not perfect, some things could be a little more polished.But I don’t consider myself a tinkerer when it comes to my 3d printer and I’m still quite happy with

I also recently bought a SV08 Max, but I'm not worried. Don't think the teased model will be as large. Also, I think it is likely that someone will figure out a way to upgrade our SV08 Max printers with INDX!

I deem that unlikely, as the two biggest markets for BBL are hobbyists/enthusiasts and farms. Even if every cosplayer would only buy BBL, the market for bigger volumes would be tiny compared to small and mid-sized printers. Issues scale exponentially with volume: belts get longer, reduced stiffness,

My upgrade recommendations: Mainline klipper (obviously) BTT Eddy probe Microswiss Flowtech hotend Enclosure (I went official) with top riser. I have a 10 minute heatsoak at the start of ABS prints to get the enclosure up to temp and make sure the bed is done expanding (my bed taco isn't too bad). T

SV08 MaxElegoo Neptune 4 Max (this is 48cm on the Z-Axis)Comgrow T500Anycubic Kobra 3 Max (50cm on the Z-Axis) They get more expensive after that and out of your price range. At $2400 you hit the Venture XL and Elegoo Orangestorm Giga. After that you're moving into the world of Industrial machines l