SV08

Don’t know what machines you have but my sv08 prints better than my Bambu so…

It was a great feeling that immediately after assembling my Sovol SV08 Max I had successfully printed something where as my CR-10 S5 took disgusting amounts of effort to print anything even bad quality and still required upgrades to get marginally better results.

You know I picked up an SV08 recently because the deals were just amazing. But as I researched, it seemed like I was going to have to replace the probe, hotend, extruder, do some kind of jury-rigging to make the bed flat, etc. Turns out it works great right out of the box. I'm replacing the hotend j

Hi, I had my sv08 for about a year now. Most of the time it was running the sovol klipper version, which supports the most used features, but fails when it comes to more advanced modifications to the printer. Here are some upgrades i made: sovol enclosure (leaks a lot of heat but can be insulated) s

I deem that unlikely, as the two biggest markets for BBL are hobbyists/enthusiasts and farms. Even if every cosplayer would only buy BBL, the market for bigger volumes would be tiny compared to small and mid-sized printers. Issues scale exponentially with volume: belts get longer, reduced stiffness,

SV08 MaxElegoo Neptune 4 Max (this is 48cm on the Z-Axis)Comgrow T500Anycubic Kobra 3 Max (50cm on the Z-Axis) They get more expensive after that and out of your price range. At $2400 you hit the Venture XL and Elegoo Orangestorm Giga. After that you're moving into the world of Industrial machines l

For my SV08, i flash mainline, install StrideMax Dual FD for 5160, Meanwell PSU 350w 48v, LDO-2504ac, Voron CNC gantry and XY joints and Cartographer V4, So far i tuned to 52V, Cartographer makes auto offset, LDO motor keeps silence, CNC gantry and XY joints makes more quality prints, and Phaetus co

SV08 has higher potential but it takes initial effort

I replaced my two upgraded CR-10 S5 printers with one SV08 Max with enclosure. I’ve got about 40 hours on it…just got it recently. I’ve printed PLA, PETG, and ABS. No problems at all. I replaced the one fan at the bottom and I’m gonna order the Bamboo feeder to replace the stock one because it sound

To build a printer makes sense because you learn so much. Building a voron may be seen in different ways. The old school hardcore way self sourcing anything and spending 3k$ to get a voron 2.4. Or buying an good quality kit like the LDO ones and spend 1.600$. Or have a look at Sovol they cloned voro