SV08

I'd say a SV08 greatly benefits from Mainline + Eddy + Triangle Labs or Microswiss Hotend. This with some good macros gets you 90% of the way. Then f.e. a case + chamber heating for some more challenging filaments like ABS/ASA or similar. Lastly INDX or Stealthchanger if you want multimaterial.

I backed the U1 simply because snapmaker is a well established company. Did the same with the Sovol SV08 Max. I’m also really looking forward to fitting the Bondtech INDX on the SV08 Max. I can only imagine how many extrusion heads I’ll be able to fit in that thing. (Slaps roof)

Check this https://www.printables.com/model/968689-sv08-extruder-fix Have you calibrate everything? Do a cold pull to see if there is a clog. Use the accessories to unclog the nozzle (the very thin needle) and the long 1,5mm thick metal thing to push down the plastic going from the top of the extrud

Check your extruder. The pin that holds the tension arm tends to slip out of place over time. This fixed mine. https://www.printables.com/model/968689-sv08-extruder-fix

I havent had the same experience as you with my SV08. This thing has been rock solid for me. I do agree that this printer should come with mainline klipper right out of the box. It would make updates and upgrades easier. I believe the taco bed problem is a bit overblown. The bed mesh is there to com

My upgrade recommendations: Mainline klipper (obviously) BTT Eddy probe Microswiss Flowtech hotend Enclosure (I went official) with top riser. I have a 10 minute heatsoak at the start of ABS prints to get the enclosure up to temp and make sure the bed is done expanding (my bed taco isn't too bad). T

I own a max and use it commercially. I've owned printers for years starting with the ender 3. Yes MOST ISSUES can be fixed with BASIC tuning of filaments which you should do anytime you stay using a different brand and type of filament. You also need to have the little power to run this printer. You

SV08 MaxElegoo Neptune 4 Max (this is 48cm on the Z-Axis)Comgrow T500Anycubic Kobra 3 Max (50cm on the Z-Axis) They get more expensive after that and out of your price range. At $2400 you hit the Venture XL and Elegoo Orangestorm Giga. After that you're moving into the world of Industrial machines l

Prusa needed to sign a deal with Bondtech to be their exclusive INDX partner. A unified EU approach to defeat Bambu Lab. They have not as far as I can tell. All Bondtech talks about is adding INDX to the consumer SV08 and SV08 Max (and Vorons and other kit printers). There’s still time. I think Prus

I think the big question is "do you need all three items from this list: multi-color, large volume and engineering filaments". If so it's worth considering. For multicolor and engineering filaments alone a Q2 is a safer option. For multicolor and smaller volume a Snapmaker U1 is a very good option a